This is the latest recevied telemetry packets stored in our database for station/object DO9HM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732306175 | 0.7 deg C | 85.1 % | 1010.2 hPa | 0 | 0 |
| 1732305274 | 1 deg C | 84.4 % | 1010.1 hPa | 0 | 0 |
| 1732304374 | 0.9 deg C | 84.8 % | 1009.9 hPa | 0 | 0 |
| 1732303476 | 0.8 deg C | 84.8 % | 1010 hPa | 0 | 0 |
| 1732302575 | 0.6 deg C | 84.9 % | 1009.9 hPa | 0 | 0 |
| 1732301678 | 0.6 deg C | 84.8 % | 1010 hPa | 0 | 0 |
| 1732300783 | 0.5 deg C | 84.9 % | 1009.8 hPa | 0 | 0 |
| 1732299881 | 0.5 deg C | 84.7 % | 1009.6 hPa | 0 | 0 |
| 1732298982 | 0.4 deg C | 84.3 % | 1009.2 hPa | 0 | 0 |
| 1732297174 | 0.3 deg C | 84 % | 1009.5 hPa | 0 | 0 |
| 1732296273 | 0.2 deg C | 83.6 % | 1009.4 hPa | 0 | 0 |
| 1732295378 | 0.4 deg C | 82 % | 1009.3 hPa | 0 | 0 |
| 1732294482 | 0.7 deg C | 80.7 % | 1008.9 hPa | 0 | 0 |
| 1732293586 | 0.6 deg C | 80.7 % | 1008.8 hPa | 0 | 0 |
| 1732292682 | 0.6 deg C | 80.8 % | 1008.8 hPa | 0 | 0 |
| 1732291777 | 0.5 deg C | 80.8 % | 1008.6 hPa | 0 | 0 |
| 1732290874 | 0.3 deg C | 80.7 % | 1008.3 hPa | 0 | 0 |
| 1732289969 | 0.5 deg C | 80.3 % | 1008 hPa | 0 | 0 |
| 1732289068 | 0.5 deg C | 80.5 % | 1007.8 hPa | 0 | 0 |
| 1732288172 | 0.7 deg C | 80.3 % | 1007.6 hPa | 0 | 0 |
| 1732286366 | 0.8 deg C | 80.2 % | 1007.3 hPa | 0 | 0 |
| 1732285463 | 1 deg C | 78.6 % | 1007 hPa | 0 | 0 |
| 1732284568 | 1.2 deg C | 77 % | 1006.7 hPa | 0 | 0 |
| 1732283669 | 1.7 deg C | 76.3 % | 1006.3 hPa | 0 | 0 |
| 1732282772 | 1.7 deg C | 76.2 % | 1006.1 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)