APRS Track Direct

My position About ☰

reset

EA3ICF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA3ICF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1744109238	68 Pkt	440 Pkt	9 Pkt	13.61 Pcnt	89 Pcnt
1744108938	78 Pkt	440 Pkt	9 Pkt	13.49 Pcnt	89 Pcnt
1744108638	78 Pkt	440 Pkt	10 Pkt	13.6 Pcnt	89 Pcnt
1744108338	73 Pkt	430 Pkt	11 Pkt	13.57 Pcnt	89 Pcnt
1744108038	61 Pkt	430 Pkt	10 Pkt	13.63 Pcnt	89 Pcnt
1744107738	61 Pkt	430 Pkt	8 Pkt	13.52 Pcnt	89 Pcnt
1744107438	61 Pkt	450 Pkt	8 Pkt	13.56 Pcnt	89 Pcnt
1744107138	66 Pkt	470 Pkt	8 Pkt	13.56 Pcnt	89 Pcnt
1744106838	64 Pkt	480 Pkt	7 Pkt	13.57 Pcnt	89 Pcnt
1744106538	78 Pkt	500 Pkt	13 Pkt	13.58 Pcnt	89 Pcnt
1744106238	72 Pkt	520 Pkt	16 Pkt	13.66 Pcnt	89 Pcnt
1744105938	67 Pkt	520 Pkt	17 Pkt	13.51 Pcnt	89 Pcnt
1744105638	70 Pkt	530 Pkt	18 Pkt	13.41 Pcnt	89 Pcnt
1744105338	67 Pkt	540 Pkt	14 Pkt	13.18 Pcnt	89 Pcnt
1744105038	75 Pkt	550 Pkt	15 Pkt	12.99 Pcnt	89 Pcnt
1744104738	74 Pkt	550 Pkt	15 Pkt	12.88 Pcnt	89 Pcnt
1744104438	82 Pkt	550 Pkt	19 Pkt	12.76 Pcnt	89 Pcnt
1744104138	99 Pkt	550 Pkt	19 Pkt	12.56 Pcnt	89 Pcnt
1744103838	100 Pkt	540 Pkt	19 Pkt	12.37 Pcnt	89 Pcnt
1744103538	89 Pkt	510 Pkt	18 Pkt	12.18 Pcnt	89 Pcnt
1744103238	100 Pkt	500 Pkt	21 Pkt	12.03 Pcnt	89 Pcnt
1744102938	90 Pkt	460 Pkt	18 Pkt	11.73 Pcnt	89 Pcnt
1744102638	85 Pkt	430 Pkt	19 Pkt	11.53 Pcnt	89 Pcnt
1744102338	87 Pkt	410 Pkt	21 Pkt	11.27 Pcnt	88 Pcnt
1744102038	80 Pkt	380 Pkt	20 Pkt	10.99 Pcnt	88 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)