This is the latest recevied telemetry packets stored in our database for station/object MB7UHT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp_Int* | Temp_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774129077 | 7.9 deg.C | 7.8 deg.C | 0 | 0 | 0 |
| 1774127878 | 8.3 deg.C | 8.1 deg.C | 0 | 0 | 0 |
| 1774126678 | 8.6 deg.C | 8.4 deg.C | 0 | 0 | 0 |
| 1774125478 | 8.9 deg.C | 8.6 deg.C | 0 | 0 | 0 |
| 1774124278 | 9.2 deg.C | 9 deg.C | 0 | 0 | 0 |
| 1774123078 | 9.6 deg.C | 9.4 deg.C | 0 | 0 | 0 |
| 1774121878 | 10.6 deg.C | 9.6 deg.C | 0 | 0 | 0 |
| 1774120678 | 10.5 deg.C | 10.3 deg.C | 0 | 0 | 0 |
| 1774119478 | 10.8 deg.C | 10.6 deg.C | 0 | 0 | 0 |
| 1774118278 | 11.5 deg.C | 11.2 deg.C | 0 | 0 | 0 |
| 1774117078 | 12.2 deg.C | 11.9 deg.C | 0 | 0 | 0 |
| 1774115878 | 12.8 deg.C | 12.3 deg.C | 0 | 0 | 0 |
| 1774114678 | 13.1 deg.C | 13 deg.C | 0 | 0 | 0 |
| 1774113478 | 13.4 deg.C | 13.3 deg.C | 0 | 0 | 0 |
| 1774112278 | 13.8 deg.C | 13.6 deg.C | 0 | 0 | 0 |
| 1774111078 | 14 deg.C | 13.9 deg.C | 0 | 0 | 0 |
| 1774109878 | 14.4 deg.C | 14.6 deg.C | 0 | 0 | 0 |
| 1774108677 | 14.5 deg.C | 14.4 deg.C | 0 | 0 | 0 |
| 1774107478 | 14.7 deg.C | 14.6 deg.C | 0 | 0 | 0 |
| 1774103878 | 15.3 deg.C | 15.3 deg.C | 0 | 0 | 0 |
| 1774102678 | 15.6 deg.C | 15.4 deg.C | 0 | 0 | 0 |
| 1774101478 | 15.7 deg.C | 15.6 deg.C | 0 | 0 | 0 |
| 1774100278 | 15.7 deg.C | 15.7 deg.C | 0 | 0 | 0 |
| 1774099078 | 15.5 deg.C | 15.6 deg.C | 0 | 0 | 0 |
| 1774097878 | 15.4 deg.C | 15.4 deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_Int: 0, 0.1, 0
Temp_Ext: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)