This is the latest recevied telemetry packets stored in our database for station/object EA1AB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775912005 | 3.71 VDC | 0 | 0 | 0 | 0 |
| 1775911102 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1775910199 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1775909296 | 3.76 VDC | 0 | 0 | 0 | 0 |
| 1775908393 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1775907490 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1775906587 | 3.8 VDC | 0 | 0 | 0 | 0 |
| 1775905684 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1775904781 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1775903878 | 3.89 VDC | 0 | 0 | 0 | 0 |
| 1775902975 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1775902072 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1775901169 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1775900266 | 3.93 VDC | 0 | 0 | 0 | 0 |
| 1775899363 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1775898460 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1775897557 | 4 VDC | 0 | 0 | 0 | 0 |
| 1775896654 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775895751 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775895443 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775894540 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775893637 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775892734 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775891831 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775890928 | 4.11 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)