APRS Track Direct

My position About ☰

reset

HS2AP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274511	0 Pkt	0 Pkt	-58 dBm	12.45 V
1836274383	0 Pkt	0 Pkt	-58 dBm	12.45 V
1836273889	1 Pkt	0 Pkt	-58 dBm	12.45 V
1770102408	2 Pkt	1 Pkt	-66 dBm	12.45 V
1770101786	6 Pkt	0 Pkt	-66 dBm	12.45 V
1770101162	1 Pkt	0 Pkt	-66 dBm	12.43 V
1770100540	1 Pkt	0 Pkt	-66 dBm	12.43 V
1770099918	6 Pkt	0 Pkt	-66 dBm	12.43 V
1770099295	1 Pkt	0 Pkt	-65 dBm	12.41 V
1770098673	1 Pkt	1 Pkt	-66 dBm	12.41 V
1770098051	6 Pkt	0 Pkt	-66 dBm	12.37 V
1770097429	1 Pkt	0 Pkt	-66 dBm	12.37 V
1770096806	1 Pkt	0 Pkt	-65 dBm	12.35 V
1770096184	6 Pkt	0 Pkt	-65 dBm	12.3 V
1770095561	1 Pkt	0 Pkt	-65 dBm	12.3 V
1770094903	1 Pkt	0 Pkt	-65 dBm	12.26 V
1770094281	6 Pkt	0 Pkt	-66 dBm	12.26 V
1770093657	1 Pkt	0 Pkt	-66 dBm	12.26 V
1770093035	1 Pkt	0 Pkt	-65 dBm	12.26 V
1770092413	5 Pkt	0 Pkt	-65 dBm	12.22 V
1770091790	1 Pkt	2 Pkt	-66 dBm	12.22 V
1770091168	1 Pkt	0 Pkt	-66 dBm	12.18 V
1770090545	6 Pkt	1 Pkt	-67 dBm	12.22 V
1770089922	1 Pkt	0 Pkt	-71 dBm	12.2 V
1770089299	1 Pkt	0 Pkt	-70 dBm	12.18 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)