APRS Track Direct

My position About ☰

reset

W4BOC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W4BOC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Ibat*	SoC*	Tbat*	IchgO*
1790645596	13.8 Vdc	2 Adc	100 Pct	22 degC	4.8 Adc
1790644996	13.8 Vdc	4 Adc	100 Pct	22 degC	0.4 Adc
1790644396	13.8 Vdc	0 Adc	100 Pct	22 degC	4.8 Adc
1790643795	13.8 Vdc	1 Adc	100 Pct	22 degC	6.2 Adc
1790643191	13.8 Vdc	0 Adc	100 Pct	22 degC	4.8 Adc
1790642591	13.7 Vdc	1 Adc	100 Pct	22 degC	9.6 Adc
1790641991	13.8 Vdc	0 Adc	100 Pct	22 degC	7.6 Adc
1790641391	13.8 Vdc	0 Adc	100 Pct	22 degC	7.6 Adc
1790640791	13.8 Vdc	3 Adc	100 Pct	22 degC	6.4 Adc
1790640190	13.8 Vdc	-3 Adc	100 Pct	22 degC	4.8 Adc
1790639586	13.8 Vdc	0 Adc	100 Pct	22 degC	8.8 Adc
1790638986	13.8 Vdc	2 Adc	100 Pct	22 degC	0 Adc
1790638386	14.4 Vdc	-3 Adc	100 Pct	22 degC	4.4 Adc
1790637786	14.4 Vdc	-4 Adc	100 Pct	22 degC	4.2 Adc
1790637186	14.4 Vdc	-3 Adc	100 Pct	22 degC	0.2 Adc
1790636585	14.4 Vdc	0 Adc	100 Pct	22 degC	4.8 Adc
1790635981	14.4 Vdc	0 Adc	100 Pct	22 degC	6.8 Adc
1790635381	14.4 Vdc	0 Adc	100 Pct	22 degC	7 Adc
1790634781	14.4 Vdc	-4 Adc	100 Pct	22 degC	4.2 Adc
1790634181	14.4 Vdc	0 Adc	100 Pct	22 degC	4.4 Adc
1790633581	14.4 Vdc	0 Adc	100 Pct	22 degC	0.8 Adc
1790632980	14.4 Vdc	-1 Adc	100 Pct	22 degC	5.4 Adc
1790632376	14.4 Vdc	0 Adc	100 Pct	22 degC	1.2 Adc
1790631776	14.4 Vdc	2 Adc	100 Pct	22 degC	7.2 Adc
1790631176	14.4 Vdc	0 Adc	100 Pct	22 degC	0 Adc

*Used Equation Coefficients:

Vbat: 0, 0.1, 0

Ibat: 0, 1, -128

SoC: 0, 1, 0

Tbat: 0, 0.5, -20

IchgO: 0, 0.2, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)