This is the latest recevied telemetry packets stored in our database for station/object AC2MI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | DigiRpt* | Temp* | InetiGate* |
|---|---|---|---|---|---|
| 1775608212 | 296 Pkts | 253 Pkts | 125 Pkts | 12 C | 0 Pkts |
| 1775604614 | 324 Pkts | 285 Pkts | 111 Pkts | 12 C | 0 Pkts |
| 1775601012 | 339 Pkts | 304 Pkts | 111 Pkts | 12 C | 0 Pkts |
| 1775597412 | 359 Pkts | 315 Pkts | 125 Pkts | 12 C | 0 Pkts |
| 1775593812 | 355 Pkts | 304 Pkts | 120 Pkts | 13 C | 0 Pkts |
| 1775590212 | 403 Pkts | 364 Pkts | 126 Pkts | 13 C | 0 Pkts |
| 1775586612 | 377 Pkts | 332 Pkts | 113 Pkts | 13 C | 0 Pkts |
| 1775583012 | 420 Pkts | 381 Pkts | 108 Pkts | 13 C | 0 Pkts |
| 1775579412 | 348 Pkts | 305 Pkts | 130 Pkts | 13 C | 0 Pkts |
| 1775575812 | 310 Pkts | 269 Pkts | 112 Pkts | 14 C | 0 Pkts |
| 1775572211 | 314 Pkts | 272 Pkts | 113 Pkts | 14 C | 0 Pkts |
| 1775568611 | 320 Pkts | 273 Pkts | 124 Pkts | 12 C | 0 Pkts |
| 1775565011 | 344 Pkts | 301 Pkts | 123 Pkts | 12 C | 0 Pkts |
| 1775561411 | 359 Pkts | 319 Pkts | 116 Pkts | 13 C | 4 Pkts |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)