This is the latest recevied telemetry packets stored in our database for station/object WB0BBE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745130738 | 401 | 602 | 0 | 0 | 0 |
| 1745129843 | 408 | 602 | 0 | 0 | 0 |
| 1745128947 | 408 | 603 | 0 | 0 | 0 |
| 1745128051 | 408 | 603 | 0 | 0 | 0 |
| 1745127156 | 408 | 603 | 0 | 0 | 0 |
| 1745126260 | 407 | 604 | 0 | 0 | 0 |
| 1745125364 | 407 | 605 | 0 | 0 | 0 |
| 1745124468 | 403 | 606 | 0 | 0 | 0 |
| 1745123573 | 406 | 606 | 0 | 0 | 0 |
| 1745122677 | 399 | 607 | 0 | 0 | 0 |
| 1745121781 | 393 | 607 | 0 | 0 | 0 |
| 1745120885 | 393 | 607 | 0 | 0 | 0 |
| 1745119989 | 399 | 606 | 0 | 0 | 0 |
| 1745119094 | 398 | 607 | 0 | 0 | 0 |
| 1745118199 | 389 | 606 | 0 | 0 | 0 |
| 1745117303 | 398 | 606 | 0 | 0 | 0 |
| 1745116408 | 391 | 606 | 0 | 0 | 0 |
| 1745115512 | 394 | 606 | 0 | 0 | 0 |
| 1745114617 | 410 | 606 | 0 | 0 | 0 |
| 1745113722 | 402 | 606 | 0 | 0 | 0 |
| 1745112826 | 411 | 606 | 0 | 0 | 0 |
| 1745111930 | 410 | 605 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)