This is the latest recevied telemetry packets stored in our database for station/object DO1MH-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1836273970 | 959.5 hPa | 14.1 C deg | 100 % | 1026.2 hPa | 0 C deg |
| 1762297572 | 959.8 hPa | 5.4 C deg | 100 % | 1028.6 hPa | 0 C deg |
| 1762295756 | 960 hPa | 6.2 C deg | 100 % | 1028.6 hPa | 0 C deg |
| 1762293940 | 960.3 hPa | 5.8 C deg | 100 % | 1029 hPa | 0 C deg |
| 1762292125 | 960.4 hPa | 6.1 C deg | 100 % | 1029.1 hPa | 0 C deg |
| 1762290325 | 960.5 hPa | 5.9 C deg | 100 % | 1029.2 hPa | 0 C deg |
| 1762286680 | 960.8 hPa | 6.1 C deg | 100 % | 1029.4 hPa | 0 C deg |
| 1762284865 | 960.7 hPa | 6.5 C deg | 100 % | 1029.3 hPa | 0 C deg |
| 1762283050 | 960.8 hPa | 7.4 C deg | 100 % | 1029.2 hPa | 0 C deg |
| 1762279419 | 961.2 hPa | 7.2 C deg | 100 % | 1029.7 hPa | 0 C deg |
| 1762277604 | 961.3 hPa | 7.6 C deg | 100 % | 1029.7 hPa | 0 C deg |
| 1762275802 | 961.1 hPa | 8.8 C deg | 100 % | 1029.1 hPa | 0 C deg |
| 1762270431 | 961.4 hPa | 11.4 C deg | 100 % | 1028.8 hPa | 0 C deg |
| 1762268613 | 961.5 hPa | 12.1 C deg | 100 % | 1028.7 hPa | 0 C deg |
| 1762266798 | 961.6 hPa | 12.5 C deg | 100 % | 1028.8 hPa | 0 C deg |
| 1762263477 | 961.5 hPa | 13.2 C deg | 100 % | 1028.5 hPa | 0 C deg |
| 1762261662 | 961.5 hPa | 13.1 C deg | 100 % | 1028.4 hPa | 0 C deg |
| 1762259853 | 961.6 hPa | 12.8 C deg | 96.8 % | 1028.7 hPa | 0 C deg |
| 1762258032 | 961.5 hPa | 12.7 C deg | 98.6 % | 1028.6 hPa | 0 C deg |
| 1762250771 | 961.5 hPa | 23 C deg | 45.5 % | 1026.1 hPa | 0 C deg |
| 1762247145 | 961.5 hPa | 23 C deg | 44.3 % | 1026.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)