This is the latest recevied telemetry packets stored in our database for station/object EA6ADB-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1774958991 | 7 | 30.2 C | 3.89 V | 600 M | 0 |
| 1774918318 | 8 | 12 C | 3.89 V | 540 M | 0 |
| 1774917064 | 7 | 11.5 C | 3.88 V | 520 M | 0 |
| 1774915568 | 5 | 10.1 C | 3.88 V | 510 M | 0 |
| 1774902247 | 5 | 30.6 C | 3.9 V | 490 M | 0 |
| 1774899402 | 6 | 30.4 C | 3.82 V | 500 M | 0 |
| 1774898572 | 7 | 30.3 C | 3.89 V | 510 M | 0 |
| 1774897901 | 7 | 30.2 C | 3.8 V | 500 M | 0 |
| 1774897894 | 7 | 30.2 C | 3.83 V | 510 M | 0 |
| 1774897537 | 7 | 30 C | 3.77 V | 450 M | 0 |
| 1774897510 | 5 | 30.1 C | 3.82 V | 490 M | 0 |
| 1774896473 | 5 | 30.1 C | 3.74 V | 480 M | 0 |
| 1774895751 | 5 | 30.1 C | 3.78 V | 500 M | 0 |
| 1774894826 | 4 | 30.1 C | 3.84 V | 540 M | 0 |
| 1774894550 | 4 | 30.1 C | 3.84 V | 500 M | 0 |
| 1774894545 | 4 | 30.1 C | 3.83 V | 490 M | 0 |
| 1774894000 | 5 | 29.7 C | 3.82 V | 500 M | 0 |
| 1774889423 | 5 | 31.6 C | 3.46 V | 480 M | 0 |
| 1774889262 | 5 | 32.6 C | 3.51 V | 530 M | 0 |
| 1774889098 | 6 | 34.1 C | 3.56 V | 600 M | 0 |
| 1774887662 | 7 | 17.7 C | 3.87 V | 480 M | 0 |
| 1774887498 | 7 | 17.3 C | 3.87 V | 470 M | 0 |
| 1774887316 | 0 | 17.2 C | 3.86 V | 470 M | 0 |
| 1774887146 | 0 | 16.9 C | 3.87 V | 510 M | 0 |
| 1774886680 | 4 | 17.3 C | 3.88 V | 560 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)