This is the latest recevied telemetry packets stored in our database for station/object HB9HFD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RXheure* | RX10min* | Volts* | RX 1h* | RXall* |
|---|---|---|---|---|---|
| 1744900690 | 0 | 0 | 0 | 0 | 0 |
| 1744899789 | 0 | 0 | 0 | 0 | 0 |
| 1744898889 | 0 | 0 | 0 | 0 | 0 |
| 1744897988 | 0 | 0 | 0 | 0 | 0 |
| 1744897087 | 0 | 0 | 0 | 0 | 0 |
| 1744896186 | 0 | 0 | 0 | 0 | 0 |
| 1744895285 | 0 | 0 | 0 | 0 | 0 |
| 1744894385 | 0 | 0 | 0 | 0 | 0 |
| 1744893484 | 0 | 0 | 0 | 0 | 0 |
| 1744892583 | 0 | 0 | 0 | 0 | 0 |
| 1744891682 | 0 | 0 | 0 | 0 | 0 |
| 1744890781 | 0 | 0 | 0 | 0 | 0 |
| 1744889881 | 0 | 0 | 0 | 0 | 0 |
| 1744888980 | 0 | 0 | 0 | 0 | 0 |
| 1744888079 | 0 | 0 | 0 | 0 | 0 |
| 1744887178 | 0 | 0 | 0 | 0 | 0 |
| 1744886277 | 0 | 0 | 0 | 0 | 0 |
| 1744885376 | 0 | 0 | 0 | 0 | 0 |
| 1744884476 | 0 | 0 | 0 | 0 | 0 |
| 1744883575 | 0 | 0 | 0 | 0 | 0 |
| 1744882674 | 0 | 0 | 0 | 0 | 0 |
| 1744881773 | 0 | 0 | 0 | 0 | 0 |
| 1744880872 | 0 | 0 | 0 | 0 | 0 |
| 1744879972 | 0 | 0 | 0 | 0 | 0 |
| 1744879071 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RXheure: 0, 0, 0
RX10min: 0, 0, 0
Volts: 0, 0, 0
RX 1h: 0, 0, 0
RXall: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)