APRS Track Direct

My position About ☰

reset

BM2OBM-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM2OBM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	CPUTemp*	RxPkts/10m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1749322827	45 C	14 p	63 p	592 p	1699 p
1749321626	44 C	11 p	91 p	569 p	1688 p
1749320426	44 C	9 p	103 p	546 p	1680 p
1749319226	44 C	32 p	113 p	529 p	1673 p
1749318025	44 C	16 p	91 p	478 p	1656 p
1749316827	43 C	15 p	81 p	443 p	1647 p
1749315626	44 C	13 p	89 p	416 p	1637 p
1749314426	44 C	10 p	91 p	387 p	1629 p
1749313226	44 C	22 p	155 p	362 p	1621 p
1749312025	43 C	15 p	161 p	327 p	1612 p
1749310826	44 C	39 p	170 p	296 p	1600 p
1749309626	43 C	25 p	119 p	207 p	1578 p
1749308425	44 C	19 p	119 p	166 p	1559 p
1749307225	45 C	19 p	124 p	126 p	1547 p
1749306026	44 C	21 p	88 p	88 p	1537 p
1749304826	44 C	21 p	47 p	47 p	1525 p
1749303626	46 C	2 p	2 p	2 p	1512 p
1749302427	48 C	27 p	135 p	2556 p	1494 p
1749301227	49 C	18 p	110 p	2502 p	1473 p
1749300027	49 C	20 p	90 p	2454 p	1452 p
1749298827	47 C	15 p	79 p	2421 p	1440 p
1749297627	48 C	15 p	76 p	2392 p	1431 p
1749296427	48 C	14 p	86 p	2364 p	1422 p
1749295227	49 C	15 p	99 p	2342 p	1419 p
1749294027	48 C	23 p	114 p	2316 p	1413 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/10m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)