APRS Track Direct

My position About ☰

reset

WXMY-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1790662042	31 degC	64 %	1011 hPa	8 kmh	0.1 mm
1790660173	32 degC	61 %	1012 hPa	8 kmh	0.1 mm
1790656412	32.5 degC	58 %	1013 hPa	9 kmh	0 mm
1790654552	32 degC	60 %	1014 hPa	9 kmh	0 mm
1790652694	32 degC	61 %	1014 hPa	9 kmh	0 mm
1790650835	31.5 degC	62 %	1014 hPa	8 kmh	0 mm
1790648963	30 degC	71 %	1014 hPa	6 kmh	0 mm
1790647101	29 degC	76 %	1014 hPa	4 kmh	0 mm
1790645223	28 degC	79 %	1013 hPa	3 kmh	0 mm
1790643366	27.5 degC	82 %	1013 hPa	1 kmh	0 mm
1790641509	26 degC	86 %	1013 hPa	0 kmh	0 mm
1790639652	25 degC	88 %	1012 hPa	0 kmh	0 mm
1790637794	24.5 degC	90 %	1012 hPa	2 kmh	0 mm
1790635933	24.5 degC	91 %	1012 hPa	3 kmh	0 mm
1790634077	24.5 degC	91 %	1012 hPa	2 kmh	0 mm
1790632216	24.5 degC	91 %	1012 hPa	1 kmh	0 mm
1790630347	24.5 degC	91 %	1012 hPa	1 kmh	0 mm
1790628490	24.5 degC	90 %	1012 hPa	2 kmh	0 mm
1790626634	25 degC	91 %	1012 hPa	2 kmh	0 mm
1790624777	25 degC	90 %	1012 hPa	3 kmh	0 mm
1790622919	25.5 degC	87 %	1012 hPa	3 kmh	0 mm
1790621057	25.5 degC	90 %	1012 hPa	3 kmh	0 mm
1790619200	25.5 degC	90 %	1013 hPa	3 kmh	0 mm
1790617339	25.5 degC	90 %	1013 hPa	2 kmh	0 mm
1790615470	25.5 degC	90 %	1013 hPa	3 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)