This is the latest recevied telemetry packets stored in our database for station/object HS2LXA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | LUX* | UV.index* | Value5* |
|---|---|---|---|---|---|
| 1836274342 | -48 dbm | 4.89 V | 27.49 Lx | 0.44 Level | 0 |
| 1836274193 | -48 dbm | 4.92 V | 29.99 Lx | 0.44 Level | 0 |
| 1766177446 | -50 dbm | 4.98 V | 5 Lx | 0.44 Level | 0 |
| 1766176844 | -50 dbm | 4.93 V | 5 Lx | 0.44 Level | 0 |
| 1766176243 | -51 dbm | 4.91 V | 5.83 Lx | 0.44 Level | 0 |
| 1766175642 | -48 dbm | 4.95 V | 5.83 Lx | 0.44 Level | 0 |
| 1766175040 | -51 dbm | 4.9 V | 5.83 Lx | 0.44 Level | 0 |
| 1766174439 | -50 dbm | 4.91 V | 6.66 Lx | 0.44 Level | 0 |
| 1766173838 | -42 dbm | 4.95 V | 6.66 Lx | 0.44 Level | 0 |
| 1766173235 | -42 dbm | 4.92 V | 6.66 Lx | 0.44 Level | 0 |
| 1766172634 | -40 dbm | 4.93 V | 7.49 Lx | 0.44 Level | 0 |
| 1766172032 | -40 dbm | 5.01 V | 7.49 Lx | 0.44 Level | 0 |
| 1766171431 | -51 dbm | 4.96 V | 7.49 Lx | 0.44 Level | 0 |
| 1766170828 | -41 dbm | 4.97 V | 8.33 Lx | 0.44 Level | 0 |
| 1766170226 | -39 dbm | 5.03 V | 9.16 Lx | 0.44 Level | 0 |
| 1766169624 | -51 dbm | 5.09 V | 10 Lx | 0.44 Level | 0 |
| 1766169020 | -50 dbm | 4.96 V | 10 Lx | 0.44 Level | 0 |
| 1766168422 | -49 dbm | 5 V | 10.83 Lx | 0.44 Level | 0 |
| 1766167819 | -39 dbm | 5.06 V | 11.66 Lx | 0.44 Level | 0 |
| 1766167217 | -40 dbm | 4.97 V | 12.49 Lx | 0.44 Level | 0 |
| 1766166615 | -49 dbm | 4.91 V | 13.33 Lx | 0.44 Level | 0 |
| 1766166013 | -40 dbm | 4.91 V | 14.16 Lx | 0.44 Level | 0 |
| 1766165411 | -50 dbm | 4.91 V | 14.16 Lx | 0.44 Level | 0 |
| 1766164809 | -50 dbm | 4.9 V | 14.99 Lx | 0.44 Level | 0 |
| 1766164209 | -49 dbm | 4.95 V | 15.83 Lx | 0.44 Level | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
LUX: 0, 0.01, 0
UV.index: 0, 0.01, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)