APRS Track Direct

My position About ☰

reset

WXMY-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1786739026	24.5 degC	93 %	1011 hPa	6 kmh	0 mm
1786737170	24.5 degC	93 %	1011 hPa	6 kmh	0 mm
1786735314	25 degC	90 %	1012 hPa	7 kmh	0 mm
1786733458	25.5 degC	89 %	1012 hPa	9 kmh	0 mm
1786729742	26 degC	85 %	1013 hPa	9 kmh	0.1 mm
1786727881	26.5 degC	83 %	1013 hPa	6 kmh	0.1 mm
1786726013	27 degC	81 %	1012 hPa	5 kmh	0 mm
1786724144	27 degC	80 %	1012 hPa	6 kmh	0 mm
1786722279	27.5 degC	78 %	1012 hPa	7 kmh	0 mm
1786720416	27.5 degC	77 %	1012 hPa	7 kmh	0 mm
1786718554	27.5 degC	77 %	1012 hPa	5 kmh	0 mm
1786716684	28 degC	76 %	1012 hPa	4 kmh	0 mm
1786714816	28 degC	74 %	1012 hPa	5 kmh	0 mm
1786712943	28.5 degC	72 %	1012 hPa	6 kmh	0 mm
1786711061	28.5 degC	70 %	1011 hPa	8 kmh	0 mm
1786709186	29 degC	68 %	1010 hPa	10 kmh	0 mm
1786707320	29 degC	66 %	1010 hPa	10 kmh	0 mm
1786705449	29.5 degC	63 %	1010 hPa	10 kmh	0 mm
1786703589	30.5 degC	59 %	1009 hPa	10 kmh	0 mm
1786701727	31 degC	55 %	1009 hPa	10 kmh	0 mm
1786699864	31.5 degC	53 %	1008 hPa	10 kmh	0 mm
1786697998	32 degC	52 %	1008 hPa	11 kmh	0 mm
1786696128	32.5 degC	51 %	1008 hPa	11 kmh	0 mm
1786694258	32.5 degC	50 %	1008 hPa	11 kmh	0 mm
1786692398	33 degC	49 %	1009 hPa	11 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)