This is the latest recevied telemetry packets stored in our database for station/object WXMY-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Hum* | Pres* | Wind* | Rain* |
|---|---|---|---|---|---|
| 1786733443 | 24 degC | 97 % | 1011 hPa | 4 kmh | 0 mm |
| 1786731587 | 24 degC | 97 % | 1011 hPa | 4 kmh | 0 mm |
| 1786729725 | 24.5 degC | 96 % | 1012 hPa | 4 kmh | 0 mm |
| 1786727865 | 24.5 degC | 95 % | 1012 hPa | 4 kmh | 0 mm |
| 1786725993 | 25 degC | 94 % | 1012 hPa | 3 kmh | 0 mm |
| 1786724128 | 25 degC | 93 % | 1012 hPa | 3 kmh | 0 mm |
| 1786722264 | 25 degC | 92 % | 1012 hPa | 4 kmh | 0 mm |
| 1786720400 | 25 degC | 92 % | 1012 hPa | 4 kmh | 0 mm |
| 1786718537 | 25 degC | 92 % | 1012 hPa | 4 kmh | 0 mm |
| 1786716668 | 25 degC | 91 % | 1012 hPa | 5 kmh | 0 mm |
| 1786714798 | 25.5 degC | 91 % | 1011 hPa | 6 kmh | 0 mm |
| 1786712924 | 25.5 degC | 90 % | 1011 hPa | 6 kmh | 0 mm |
| 1786711040 | 25.5 degC | 89 % | 1011 hPa | 3 kmh | 0 mm |
| 1786709169 | 26 degC | 90 % | 1011 hPa | 4 kmh | 0 mm |
| 1786707304 | 26 degC | 90 % | 1011 hPa | 4 kmh | 0 mm |
| 1786705434 | 26 degC | 89 % | 1011 hPa | 4 kmh | 0 mm |
| 1786703573 | 26.5 degC | 88 % | 1010 hPa | 6 kmh | 0 mm |
| 1786701712 | 26.5 degC | 87 % | 1010 hPa | 6 kmh | 0 mm |
| 1786699847 | 26.5 degC | 88 % | 1010 hPa | 5 kmh | 0 mm |
| 1786697980 | 26.5 degC | 89 % | 1010 hPa | 2 kmh | 0.1 mm |
| 1786696108 | 26.5 degC | 89 % | 1010 hPa | 1 kmh | 0.1 mm |
| 1786694243 | 26 degC | 90 % | 1011 hPa | 1 kmh | 0.4 mm |
| 1786692382 | 25.5 degC | 93 % | 1011 hPa | 2 kmh | 0.4 mm |
| 1786690518 | 27.5 degC | 81 % | 1012 hPa | 6 kmh | 0.1 mm |
| 1786688647 | 29 degC | 73 % | 1012 hPa | 6 kmh | 0.1 mm |
*Used Equation Coefficients:
Temp: 0, 0.5, -20
Hum: 0, 1, 0
Pres: 0, 1, 800
Wind: 0, 1, 0
Rain: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)