APRS Track Direct

My position About ☰

reset

WXMY-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1779753405	25 degC	96 %	1012 hPa	10 kmh	0.3 mm
1779751548	24.5 degC	96 %	1011 hPa	7 kmh	0.3 mm
1779749689	24.5 degC	94 %	1011 hPa	8 kmh	0.1 mm
1779747831	25 degC	92 %	1011 hPa	13 kmh	0.1 mm
1779744024	25.5 degC	93 %	1010 hPa	11 kmh	0.1 mm
1779742097	25.5 degC	93 %	1010 hPa	9 kmh	0.1 mm
1779740206	25.5 degC	93 %	1010 hPa	9 kmh	0.1 mm
1779738332	26 degC	93 %	1010 hPa	8 kmh	0 mm
1779736418	26 degC	91 %	1011 hPa	7 kmh	0 mm
1779734510	23.5 degC	96 %	1012 hPa	8 kmh	0 mm
1779732629	24 degC	96 %	1012 hPa	10 kmh	0.1 mm
1779730722	24 degC	96 %	1013 hPa	14 kmh	0.1 mm
1779728838	24.5 degC	95 %	1014 hPa	17 kmh	0 mm
1779726960	25 degC	92 %	1014 hPa	17 kmh	0 mm
1779725060	25.5 degC	89 %	1014 hPa	16 kmh	0 mm
1779723150	26.5 degC	85 %	1013 hPa	13 kmh	0 mm
1779721273	27.5 degC	82 %	1013 hPa	11 kmh	0 mm
1779719372	27.5 degC	80 %	1012 hPa	10 kmh	0 mm
1779717464	28 degC	80 %	1012 hPa	13 kmh	0 mm
1779715597	25.5 degC	94 %	1011 hPa	13 kmh	0 mm
1779713734	26 degC	88 %	1012 hPa	13 kmh	0 mm
1779711867	26.5 degC	85 %	1011 hPa	12 kmh	0 mm
1779709952	27 degC	84 %	1011 hPa	10 kmh	0 mm
1779708067	27.5 degC	84 %	1011 hPa	9 kmh	0 mm
1779706196	28 degC	83 %	1010 hPa	9 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)