APRS Track Direct

My position About ☰

reset

HS2EOY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2EOY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eff*
1836274393	14.06 Volt	20 Pkt	85 Pcnt	68 Pcnt
1836274244	14.06 Volt	20 Pkt	58 Pcnt	66 Pcnt
1762259710	14.06 Volt	0 Pkt	12 Pcnt	56 Pcnt
1762259109	14.06 Volt	0 Pkt	12 Pcnt	56 Pcnt
1762258509	14.06 Volt	0 Pkt	12 Pcnt	56 Pcnt
1762257908	14.06 Volt	0 Pkt	28 Pcnt	56 Pcnt
1762257308	14.06 Volt	0 Pkt	25 Pcnt	56 Pcnt
1762256707	14.06 Volt	0 Pkt	42 Pcnt	56 Pcnt
1762256106	14.06 Volt	10 Pkt	43 Pcnt	56 Pcnt
1762255506	14.06 Volt	10 Pkt	40 Pcnt	56 Pcnt
1762254905	14.06 Volt	10 Pkt	40 Pcnt	56 Pcnt
1762254305	14.06 Volt	0 Pkt	54 Pcnt	56 Pcnt
1762253704	14.06 Volt	0 Pkt	66 Pcnt	56 Pcnt
1762253104	14.06 Volt	0 Pkt	25 Pcnt	56 Pcnt
1762252503	14.06 Volt	0 Pkt	0 Pcnt	56 Pcnt
1762251902	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762251302	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762250701	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762250101	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762249500	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762248900	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762248299	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762247698	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762247098	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt
1762246497	14.06 Volt	0 Pkt	100 Pcnt	56 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)