APRS Track Direct

My position About ☰

reset

YM4KBO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KBO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1779788035	4 Pkt	-74 dBm	0 V
1779787713	6 Pkt	-73 dBm	0 V
1779787390	1 Pkt	-74 dBm	0 V
1779787068	5 Pkt	-72 dBm	0 V
1779786746	5 Pkt	-74 dBm	0 V
1779786423	4 Pkt	-77 dBm	0 V
1779786101	1 Pkt	-75 dBm	0 V
1779785779	8 Pkt	-77 dBm	0 V
1779785456	2 Pkt	-78 dBm	0 V
1779785134	4 Pkt	-76 dBm	0 V
1779784812	3 Pkt	-78 dBm	0 V
1779784489	4 Pkt	-75 dBm	0 V
1779784167	4 Pkt	-78 dBm	0 V
1779783845	4 Pkt	-76 dBm	0 V
1779783522	5 Pkt	-75 dBm	0.02 V
1779783200	2 Pkt	-75 dBm	0 V
1779782878	3 Pkt	-74 dBm	0 V
1779782556	5 Pkt	-74 dBm	0 V
1779782234	5 Pkt	-74 dBm	0 V
1779781911	4 Pkt	-74 dBm	0 V
1779781588	5 Pkt	-75 dBm	0 V
1779781267	2 Pkt	-77 dBm	0 V
1779780944	5 Pkt	-73 dBm	0 V
1779780622	5 Pkt	-71 dBm	0 V
1779780299	3 Pkt	-77 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)