This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-33. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779901451 | 4.11 VDC | 14.66 VDC | 0 | 0 | 0 |
| 1779900551 | 4.11 VDC | 14.7 VDC | 0 | 0 | 0 |
| 1779899651 | 4.11 VDC | 14.72 VDC | 0 | 0 | 0 |
| 1779898751 | 4.11 VDC | 14.72 VDC | 0 | 0 | 0 |
| 1779897851 | 4.11 VDC | 14.72 VDC | 0 | 0 | 0 |
| 1779896035 | 4.1 VDC | 14.76 VDC | 0 | 0 | 0 |
| 1779895153 | 4.1 VDC | 14.76 VDC | 0 | 0 | 0 |
| 1779894253 | 4.1 VDC | 14.8 VDC | 0 | 0 | 0 |
| 1779893353 | 4.11 VDC | 14.84 VDC | 0 | 0 | 0 |
| 1779892453 | 4.11 VDC | 14.82 VDC | 0 | 0 | 0 |
| 1779891553 | 4.11 VDC | 14.88 VDC | 0 | 0 | 0 |
| 1779890653 | 4.1 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1779889753 | 4.11 VDC | 13.8 VDC | 0 | 0 | 0 |
| 1779888852 | 4.11 VDC | 13.72 VDC | 0 | 0 | 0 |
| 1779887952 | 4.1 VDC | 13.64 VDC | 0 | 0 | 0 |
| 1779887052 | 4.09 VDC | 13.56 VDC | 0 | 0 | 0 |
| 1779886152 | 4.09 VDC | 13.44 VDC | 0 | 0 | 0 |
| 1779885252 | 4.1 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1779884352 | 4.1 VDC | 13.16 VDC | 0 | 0 | 0 |
| 1779883452 | 4.1 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1779882551 | 4.1 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1779881651 | 4.1 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1779880751 | 4.1 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1779879850 | 4.11 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1779878950 | 4.1 VDC | 12.7 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)