This is the latest recevied telemetry packets stored in our database for station/object VA7GFZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
|---|---|---|---|---|---|
| 1779762407 | 11.8 Volt | 230 Pkt | 0 Pkt | 83 Pcnt | 52.7 F |
| 1779762107 | 11.8 Volt | 230 Pkt | 0 Pkt | 82 Pcnt | 52.7 F |
| 1779762107 | 11.8 Volt | 230 Pkt | 0 Pkt | 82 Pcnt | 52.7 F |
| 1779761807 | 11.8 Volt | 220 Pkt | 0 Pkt | 81 Pcnt | 52.7 F |
| 1779761507 | 11.8 Volt | 220 Pkt | 0 Pkt | 79 Pcnt | 52.7 F |
| 1779761507 | 11.8 Volt | 220 Pkt | 0 Pkt | 79 Pcnt | 52.7 F |
| 1779761207 | 11.8 Volt | 220 Pkt | 0 Pkt | 78 Pcnt | 52.7 F |
| 1779760907 | 11.8 Volt | 210 Pkt | 0 Pkt | 77 Pcnt | 52.7 F |
| 1779760907 | 11.8 Volt | 210 Pkt | 0 Pkt | 77 Pcnt | 52.7 F |
| 1779760607 | 11.8 Volt | 210 Pkt | 0 Pkt | 78 Pcnt | 52.7 F |
| 1779760308 | 11.8 Volt | 210 Pkt | 0 Pkt | 76 Pcnt | 52.7 F |
| 1779760307 | 11.8 Volt | 210 Pkt | 0 Pkt | 76 Pcnt | 52.7 F |
| 1779760007 | 11.8 Volt | 200 Pkt | 0 Pkt | 77 Pcnt | 53.6 F |
| 1779759707 | 11.8 Volt | 200 Pkt | 0 Pkt | 75 Pcnt | 53.6 F |
| 1779759707 | 11.8 Volt | 200 Pkt | 0 Pkt | 75 Pcnt | 53.6 F |
| 1779759407 | 11.8 Volt | 200 Pkt | 0 Pkt | 74 Pcnt | 53.6 F |
| 1779759107 | 11.8 Volt | 200 Pkt | 0 Pkt | 73 Pcnt | 53.6 F |
| 1779759107 | 11.8 Volt | 200 Pkt | 0 Pkt | 73 Pcnt | 53.6 F |
| 1779758807 | 11.8 Volt | 200 Pkt | 0 Pkt | 72 Pcnt | 53.6 F |
| 1779758508 | 11.8 Volt | 190 Pkt | 0 Pkt | 71 Pcnt | 53.6 F |
| 1779758507 | 11.8 Volt | 190 Pkt | 0 Pkt | 71 Pcnt | 53.6 F |
| 1779758207 | 11.8 Volt | 190 Pkt | 0 Pkt | 70 Pcnt | 53.6 F |
| 1779757907 | 11.8 Volt | 200 Pkt | 0 Pkt | 71 Pcnt | 53.6 F |
| 1779757907 | 11.8 Volt | 200 Pkt | 0 Pkt | 71 Pcnt | 53.6 F |
| 1779757607 | 11.8 Volt | 200 Pkt | 0 Pkt | 70 Pcnt | 53.6 F |
*Used Equation Coefficients:
Vin: 0, 0.1, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.9, -83.2
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)