This is the latest recevied telemetry packets stored in our database for station/object W2KGY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | VSolar* | VLight* | CPUTemp* | CPULoad* |
|---|---|---|---|---|---|
| 1782483046 | 26.3 | 28.5 | 0 | 42.4 | 0 |
| 1782482866 | 26.2 | 33.7 | 0 | 41.9 | 0 |
| 1782482805 | 26.3 | 28.3 | 0 | 41.9 | 0 |
| 1782482503 | 26.2 | 33.8 | 0 | 41.9 | 0 |
| 1782482443 | 26.2 | 28.2 | 0 | 41.9 | 0 |
| 1782482382 | 26.3 | 33.6 | 0 | 41.9 | 0 |
| 1782481841 | 26.2 | 28.6 | 0 | 41.9 | 0 |
| 1782481780 | 26.1 | 34 | 0 | 41.9 | 0 |
| 1782481659 | 26.1 | 28.1 | 0 | 41.9 | 0 |
| 1782481599 | 26.1 | 33.9 | 0 | 41.9 | 0 |
| 1782481537 | 26.1 | 28.1 | 0 | 41.9 | 0 |
| 1782481420 | 26.1 | 33.9 | 0 | 41.3 | 0 |
| 1782481115 | 26.2 | 33.7 | 0 | 41.9 | 0 |
| 1782480755 | 26.1 | 28.1 | 0 | 41.3 | 0 |
| 1782480574 | 26 | 34.2 | 0 | 41.3 | 0 |
| 1782480394 | 26 | 28.5 | 0 | 41.9 | 0 |
| 1782478533 | 26.1 | 34.3 | 0 | 41.3 | 0 |
| 1782478409 | 26.2 | 28.3 | 0 | 40.8 | 0 |
| 1782478290 | 26.2 | 34 | 0 | 41.9 | 0 |
| 1782477928 | 26 | 34 | 0 | 41.3 | 0.03 |
| 1782477869 | 26.1 | 28.1 | 0 | 41.3 | 0 |
| 1782477807 | 26.1 | 34 | 0 | 41.3 | 0 |
| 1782477445 | 25.8 | 28.4 | 0 | 41.3 | 0 |
| 1782476964 | 26 | 33.9 | 0 | 41.3 | 0 |
| 1782476842 | 26.1 | 28.1 | 0 | 41.3 | 0 |
*Used Equation Coefficients:
VBat: 0, 1, 0
VSolar: 0, 1, 0
VLight: 0, 1, 0
CPUTemp: 0, 1, 0
CPULoad: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)