APRS Track Direct

My position About ☰

reset

WC4PEM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1836274584	27.5 C	14.33 Volt	310 Pkt	1020 Pkt	65 Pcnt
1836274582	27.5 C	14.33 Volt	310 Pkt	1020 Pkt	65 Pcnt
1836274433	27 C	14.18 Volt	310 Pkt	1030 Pkt	64 Pcnt
1836274432	27 C	14.18 Volt	310 Pkt	1030 Pkt	64 Pcnt
1836274282	27 C	14.33 Volt	310 Pkt	1030 Pkt	65 Pcnt
1836274132	27 C	14.25 Volt	320 Pkt	1020 Pkt	64 Pcnt
1836273986	27 C	14.33 Volt	300 Pkt	1070 Pkt	64 Pcnt
1836273982	27 C	14.33 Volt	300 Pkt	1070 Pkt	64 Pcnt
1762335673	32.5 C	14.33 Volt	360 Pkt	1120 Pkt	64 Pcnt
1762335672	32.5 C	14.33 Volt	360 Pkt	1120 Pkt	64 Pcnt
1762335372	32.5 C	14.33 Volt	360 Pkt	1110 Pkt	64 Pcnt
1762335073	32.5 C	14.33 Volt	360 Pkt	1110 Pkt	64 Pcnt
1762335072	32.5 C	14.33 Volt	360 Pkt	1110 Pkt	64 Pcnt
1762334772	32.5 C	14.33 Volt	370 Pkt	1110 Pkt	64 Pcnt
1762334473	32.5 C	14.33 Volt	360 Pkt	1100 Pkt	64 Pcnt
1762334472	32.5 C	14.33 Volt	360 Pkt	1100 Pkt	64 Pcnt
1762334172	32.5 C	14.33 Volt	360 Pkt	1110 Pkt	65 Pcnt
1762333874	32.5 C	14.33 Volt	360 Pkt	1100 Pkt	65 Pcnt
1762333872	32.5 C	14.33 Volt	360 Pkt	1100 Pkt	65 Pcnt
1762333573	32.5 C	14.33 Volt	360 Pkt	1110 Pkt	66 Pcnt
1762333273	32.5 C	14.33 Volt	350 Pkt	1090 Pkt	66 Pcnt
1762333272	32.5 C	14.33 Volt	350 Pkt	1090 Pkt	66 Pcnt
1762332972	32.5 C	14.33 Volt	350 Pkt	1090 Pkt	65 Pcnt
1762332673	32.5 C	14.18 Volt	340 Pkt	1090 Pkt	65 Pcnt
1762332672	32.5 C	14.18 Volt	340 Pkt	1090 Pkt	65 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)