APRS Track Direct

My position About ☰

reset

S54LD-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S54LD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	VCC*	RSSI*	Uptime*	Temp*	Humid*
1774914271	2.9 V	-64 dBm	0 min	0 C	214748360 %
1774896800	2.9 V	-57 dBm	390 min	21.2 C	66.7 %
1774895899	2.9 V	-58 dBm	375 min	21.2 C	66.7 %
1774894999	2.9 V	-55 dBm	360 min	21.2 C	66.7 %
1774893197	2.9 V	-57 dBm	330 min	21.2 C	66.7 %
1774892296	2.9 V	-56 dBm	315 min	21.2 C	66.7 %
1774891396	2.9 V	-57 dBm	300 min	21.2 C	66.7 %
1774890496	2.9 V	-56 dBm	285 min	21.2 C	66.7 %
1774889594	2.9 V	-57 dBm	270 min	21.2 C	66.7 %
1774888694	2.9 V	-54 dBm	255 min	21.2 C	66.7 %
1774887793	2.9 V	-51 dBm	240 min	21.2 C	66.7 %
1774885991	2.9 V	-55 dBm	210 min	21.2 C	66.7 %
1774885091	2.9 V	-47 dBm	195 min	21.2 C	66.7 %
1774884191	2.9 V	-45 dBm	180 min	21.2 C	66.7 %
1774883290	2.9 V	-39 dBm	165 min	21.2 C	66.7 %
1774882390	2.9 V	-41 dBm	150 min	21.2 C	66.7 %
1774881489	2.9 V	-41 dBm	135 min	21.2 C	66.7 %
1774880588	2.9 V	-42 dBm	120 min	21.2 C	66.7 %
1774878787	2.9 V	-40 dBm	90 min	21.2 C	66.7 %
1774877885	2.9 V	-41 dBm	75 min	21.2 C	66.7 %
1774876984	2.9 V	-43 dBm	60 min	21.2 C	66.7 %
1774876084	2.9 V	-41 dBm	45 min	21.2 C	66.7 %
1774875183	2.9 V	-45 dBm	30 min	21.2 C	66.7 %
1774874283	2.9 V	-41 dBm	15 min	21.2 C	66.7 %
1774873382	2.9 V	-47 dBm	0 min	21.2 C	66.7 %

*Used Equation Coefficients:

VCC: 0, 0.1, 0

RSSI: 0, -1, 0

Uptime: 0, 1, 0

Temp: 0, 0.1, 0

Humid: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)