This is the latest recevied telemetry packets stored in our database for station/object DC5WT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719423328 | 29.1 deg C | 44.1 % | 1007.7 hPa | 0 | 0 |
1719422428 | 30.7 deg C | 44.1 % | 1007.5 hPa | 0 | 0 |
1719421528 | 33.5 deg C | 37.5 % | 1006.6 hPa | 0 | 0 |
1719420628 | 34.5 deg C | 36.8 % | 1006.4 hPa | 0 | 0 |
1719419728 | 35.3 deg C | 34.3 % | 1006 hPa | 0 | 0 |
1719418828 | 35.9 deg C | 32.5 % | 1005.9 hPa | 0 | 0 |
1719417928 | 36.8 deg C | 31.6 % | 1005.8 hPa | 0 | 0 |
1719417027 | 36.8 deg C | 31.4 % | 1005.8 hPa | 0 | 0 |
1719416127 | 36.3 deg C | 30.8 % | 1006 hPa | 0 | 0 |
1719415227 | 35.8 deg C | 31.1 % | 1006.3 hPa | 0 | 0 |
1719414327 | 36.3 deg C | 32.8 % | 1006.4 hPa | 0 | 0 |
1719413427 | 36 deg C | 32.5 % | 1006.5 hPa | 0 | 0 |
1719412527 | 36.3 deg C | 32.3 % | 1006.6 hPa | 0 | 0 |
1719411627 | 35.4 deg C | 32.1 % | 1006.9 hPa | 0 | 0 |
1719410727 | 35.3 deg C | 31.1 % | 1007 hPa | 0 | 0 |
1719409827 | 36.6 deg C | 30 % | 1006.8 hPa | 0 | 0 |
1719408927 | 37.2 deg C | 30.4 % | 1006.8 hPa | 0 | 0 |
1719408027 | 37 deg C | 31.5 % | 1007.1 hPa | 0 | 0 |
1719407126 | 36.8 deg C | 31.8 % | 1007.2 hPa | 0 | 0 |
1719406226 | 36.7 deg C | 33.6 % | 1007.4 hPa | 0 | 0 |
1719405326 | 36.1 deg C | 34.5 % | 1007.6 hPa | 0 | 0 |
1719404426 | 37.2 deg C | 33.3 % | 1007.6 hPa | 0 | 0 |
1719403526 | 37.9 deg C | 31.9 % | 1007.7 hPa | 0 | 0 |
1719402626 | 37.4 deg C | 33 % | 1008 hPa | 0 | 0 |
1719401726 | 37.4 deg C | 34 % | 1008 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)