APRS Track Direct

My position About ☰

reset

VK4RHR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RHR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temp*	Vin*	Rx1h*	DeEff%*	RXpkt*
1732558882	36 C	13.2 Volt	27 Pkt	68 pkt	49 Spam
1732557982	35.5 C	13.2 Volt	26 Pkt	64 pkt	45 Spam
1732557082	36 C	13.2 Volt	27 Pkt	63 pkt	44 Spam
1732556182	36 C	13.2 Volt	28 Pkt	62 pkt	34 Spam
1732555282	36 C	13.2 Volt	28 Pkt	65 pkt	45 Spam
1732554382	36 C	13.2 Volt	27 Pkt	70 pkt	52 Spam
1732553482	36 C	13.2 Volt	26 Pkt	72 pkt	46 Spam
1732552582	36 C	13.2 Volt	26 Pkt	74 pkt	32 Spam
1732551682	36 C	13.28 Volt	26 Pkt	71 pkt	45 Spam
1732550782	36 C	13.2 Volt	27 Pkt	68 pkt	39 Spam
1732549882	36.5 C	13.2 Volt	28 Pkt	71 pkt	57 Spam
1732548982	36.5 C	13.28 Volt	27 Pkt	73 pkt	33 Spam
1732548082	36.5 C	13.28 Volt	27 Pkt	77 pkt	48 Spam
1732547182	36.5 C	13.28 Volt	27 Pkt	81 pkt	36 Spam
1732546282	36.5 C	13.28 Volt	27 Pkt	76 pkt	46 Spam
1732545382	36 C	13.28 Volt	28 Pkt	72 pkt	35 Spam
1732544482	36.5 C	13.28 Volt	27 Pkt	68 pkt	43 Spam
1732543582	37 C	13.28 Volt	27 Pkt	66 pkt	42 Spam
1732542682	37.5 C	13.28 Volt	27 Pkt	67 pkt	55 Spam
1732541782	38 C	13.28 Volt	26 Pkt	67 pkt	29 Spam
1732540883	38 C	13.28 Volt	26 Pkt	73 pkt	44 Spam
1732539982	38 C	13.28 Volt	25 Pkt	76 pkt	42 Spam
1732539083	38.5 C	13.28 Volt	26 Pkt	81 pkt	41 Spam
1732538183	38.5 C	13.28 Volt	27 Pkt	87 pkt	31 Spam
1732537283	19.5 C	13.28 Volt	27 Pkt	89 pkt	38 Spam

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Rx1h: 0, 1, 0

DeEff%: 0, 1, 0

RXpkt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)