This is the latest recevied telemetry packets stored in our database for station/object F4FRG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1779772870 | 7.65 Volt | 190 Pkt | 90 Pkt | 95 Pcnt | 0 None |
| 1779772571 | 7.65 Volt | 190 Pkt | 90 Pkt | 94 Pcnt | 0 None |
| 1779772269 | 7.65 Volt | 200 Pkt | 100 Pkt | 95 Pcnt | 0 None |
| 1779771970 | 7.65 Volt | 200 Pkt | 100 Pkt | 95 Pcnt | 0 None |
| 1779771669 | 7.65 Volt | 210 Pkt | 100 Pkt | 96 Pcnt | 0 None |
| 1779771068 | 7.65 Volt | 200 Pkt | 100 Pkt | 97 Pcnt | 0 None |
| 1779769568 | 7.65 Volt | 190 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779768966 | 7.65 Volt | 190 Pkt | 90 Pkt | 96 Pcnt | 0 None |
| 1779768667 | 7.65 Volt | 200 Pkt | 90 Pkt | 96 Pcnt | 0 None |
| 1779768365 | 7.65 Volt | 200 Pkt | 90 Pkt | 96 Pcnt | 0 None |
| 1779768066 | 7.65 Volt | 200 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779767766 | 7.65 Volt | 200 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779767467 | 7.65 Volt | 210 Pkt | 90 Pkt | 98 Pcnt | 0 None |
| 1779767166 | 7.43 Volt | 200 Pkt | 80 Pkt | 97 Pcnt | 0 None |
| 1779766865 | 7.65 Volt | 210 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779766565 | 7.65 Volt | 210 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779766265 | 7.65 Volt | 220 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779765964 | 7.65 Volt | 220 Pkt | 90 Pkt | 96 Pcnt | 0 None |
| 1779765364 | 7.65 Volt | 220 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779765063 | 7.65 Volt | 220 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779764763 | 7.65 Volt | 230 Pkt | 90 Pkt | 97 Pcnt | 0 None |
| 1779764463 | 7.65 Volt | 230 Pkt | 90 Pkt | 96 Pcnt | 0 None |
| 1779764162 | 7.65 Volt | 230 Pkt | 100 Pkt | 96 Pcnt | 0 None |
| 1779763562 | 7.65 Volt | 240 Pkt | 100 Pkt | 96 Pcnt | 0 None |
| 1779763262 | 7.65 Volt | 230 Pkt | 90 Pkt | 95 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)