APRS Track Direct

My position About ☰

reset

SR8WXB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8WXB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1732267331	54 Pkt	9 Pkt	6 Pkt	20.5 DegC
1732266728	50 Pkt	14 Pkt	11 Pkt	20.5 DegC
1732266125	62 Pkt	13 Pkt	11 Pkt	20.5 DegC
1732265525	67 Pkt	19 Pkt	16 Pkt	20 DegC
1732264922	74 Pkt	19 Pkt	17 Pkt	20 DegC
1732264322	73 Pkt	17 Pkt	14 Pkt	20 DegC
1732263719	69 Pkt	17 Pkt	16 Pkt	19.5 DegC
1732263115	64 Pkt	18 Pkt	15 Pkt	19.5 DegC
1732262512	61 Pkt	11 Pkt	9 Pkt	19.5 DegC
1732261913	61 Pkt	14 Pkt	11 Pkt	19.5 DegC
1732261308	41 Pkt	10 Pkt	4 Pkt	19.5 DegC
1732260699	53 Pkt	9 Pkt	7 Pkt	19 DegC
1732260096	59 Pkt	12 Pkt	9 Pkt	19 DegC
1732259492	44 Pkt	5 Pkt	2 Pkt	19 DegC
1732258889	53 Pkt	7 Pkt	5 Pkt	19 DegC
1732258288	40 Pkt	10 Pkt	7 Pkt	18.5 DegC
1732257685	24 Pkt	5 Pkt	3 Pkt	18.5 DegC
1732257085	34 Pkt	7 Pkt	4 Pkt	18.5 DegC
1732256482	25 Pkt	6 Pkt	4 Pkt	18.5 DegC
1732255882	35 Pkt	6 Pkt	4 Pkt	18.5 DegC
1732255279	35 Pkt	6 Pkt	4 Pkt	18.5 DegC
1732254678	29 Pkt	6 Pkt	3 Pkt	18 DegC
1732254075	34 Pkt	5 Pkt	3 Pkt	18 DegC
1732253475	41 Pkt	7 Pkt	4 Pkt	18 DegC
1732252873	38 Pkt	5 Pkt	3 Pkt	18 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)