This is the latest recevied telemetry packets stored in our database for station/object DL4HEL-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ATemp* | AHum* | vRate* | Sats* | Alt* |
|---|---|---|---|---|---|
| 1777994349 | 25.7 | 46.5 | 0 | 0 | 96.2 |
| 1777994197 | 25.8 | 46.5 | 0 | 0 | 96.2 |
| 1777993281 | 25.7 | 46.7 | 0 | 0 | 96.2 |
| 1777993128 | 25.7 | 46.7 | 0 | 0 | 96.2 |
| 1777992055 | 24.7 | 50.3 | 0 | 0 | 0 |
| 1777989958 | 26.5 | 44.7 | 0.2 | 9 | 74.6 |
| 1777989805 | 26.3 | 44.9 | -0.3 | 8 | 49.7 |
| 1777989346 | 26.1 | 45.9 | 0 | 7 | 62.8 |
| 1777989192 | 25.8 | 46.5 | 0 | 7 | 66.4 |
| 1777982155 | 25.6 | 45.3 | 0 | 0 | 0 |
| 1777980926 | 24.3 | 49.5 | 0 | 0 | 0 |
| 1777972870 | 26.1 | 41.4 | 0 | 0 | 73.4 |
| 1777972259 | 25.4 | 43.1 | 0 | 0 | 73.4 |
| 1777971784 | 25.1 | 43.9 | 0 | 0 | 0 |
| 1777971631 | 24.8 | 45.3 | 0 | 0 | 0 |
| 1777971094 | 22.8 | 49.4 | 0 | 0 | 0 |
| 1777971014 | 22.8 | 49.2 | 0 | 0 | 0 |
*Used Equation Coefficients:
ATemp: 0, 1, 0
AHum: 0, 1, 0
vRate: 0, 1, 0
Sats: 0, 1, 0
Alt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)