APRS Track Direct

My position About ☰

reset

XE2J-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1774624335	13.95 Volt	150 Pkt	80 Pkt	98 Pcnt	26.5 C
1774624036	12.98 Volt	150 Pkt	80 Pkt	98 Pcnt	26.5 C
1774623735	13.95 Volt	150 Pkt	70 Pkt	98 Pcnt	26 C
1774623435	13.95 Volt	140 Pkt	70 Pkt	97 Pcnt	26 C
1774623135	13.95 Volt	150 Pkt	70 Pkt	97 Pcnt	26 C
1774622835	11.48 Volt	150 Pkt	80 Pkt	96 Pcnt	26 C
1774622535	13.95 Volt	150 Pkt	80 Pkt	104 Pcnt	26 C
1774622235	13.95 Volt	140 Pkt	80 Pkt	94 Pcnt	26 C
1774621935	13.95 Volt	140 Pkt	80 Pkt	94 Pcnt	26 C
1774621635	13.95 Volt	140 Pkt	80 Pkt	94 Pcnt	26 C
1774621036	14.03 Volt	140 Pkt	70 Pkt	92 Pcnt	26 C
1774620735	13.95 Volt	140 Pkt	70 Pkt	92 Pcnt	26 C
1774620437	13.95 Volt	130 Pkt	70 Pkt	92 Pcnt	26 C
1774620135	13.95 Volt	130 Pkt	70 Pkt	88 Pcnt	26 C
1774619835	13.95 Volt	130 Pkt	70 Pkt	88 Pcnt	26 C
1774619535	13.95 Volt	120 Pkt	60 Pkt	85 Pcnt	26 C
1774619235	14.03 Volt	120 Pkt	60 Pkt	83 Pcnt	26 C
1774618935	13.95 Volt	120 Pkt	60 Pkt	81 Pcnt	26 C
1774618635	14.03 Volt	110 Pkt	50 Pkt	82 Pcnt	26 C
1774618335	13.95 Volt	100 Pkt	50 Pkt	80 Pcnt	26 C
1774618035	13.95 Volt	90 Pkt	50 Pkt	79 Pcnt	26 C
1774617735	14.03 Volt	90 Pkt	50 Pkt	76 Pcnt	26.5 C
1774617436	13.95 Volt	80 Pkt	40 Pkt	75 Pcnt	26.5 C
1774617135	13.95 Volt	80 Pkt	40 Pkt	75 Pcnt	26 C
1774616836	13.95 Volt	80 Pkt	40 Pkt	72 Pcnt	26 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)