This is the latest recevied telemetry packets stored in our database for station/object PY5KT-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732255181 | 1249 | 457 | 0 | 32 | 9378 |
| 1732255120 | 1249 | 458 | 0 | 32 | 9366 |
| 1732255059 | 1249 | 458 | 0 | 32 | 9371 |
| 1732254998 | 1249 | 458 | 0 | 32 | 9377 |
| 1732254937 | 1249 | 458 | 0 | 32 | 9402 |
| 1732254876 | 1249 | 459 | 0 | 32 | 9419 |
| 1732254815 | 1249 | 459 | 0 | 32 | 9421 |
| 1732254754 | 1249 | 459 | 0 | 32 | 9421 |
| 1732254692 | 1249 | 459 | 0 | 32 | 9413 |
| 1732254631 | 1249 | 459 | 0 | 32 | 9425 |
| 1732254570 | 1249 | 460 | 0 | 32 | 9446 |
| 1732254509 | 1249 | 460 | 0 | 32 | 9479 |
| 1732254448 | 1249 | 460 | 0 | 32 | 9488 |
| 1732254387 | 1249 | 460 | 0 | 32 | 9495 |
| 1732254326 | 1249 | 460 | 0 | 32 | 9499 |
| 1732254265 | 1249 | 460 | 0 | 16 | 9502 |
| 1732254204 | 1249 | 460 | 0 | 16 | 9504 |
| 1732254142 | 1249 | 460 | 0 | 16 | 9500 |
| 1732254081 | 1249 | 460 | 0 | 16 | 9498 |
| 1732254019 | 1249 | 460 | 0 | 16 | 9494 |
| 1732253958 | 1249 | 459 | 0 | 16 | 9483 |
| 1732253897 | 1249 | 459 | 0 | 16 | 9473 |
| 1732253836 | 1249 | 459 | 0 | 16 | 9466 |
| 1732253774 | 1249 | 459 | 0 | 16 | 9469 |
| 1732253713 | 1249 | 459 | 0 | 16 | 9476 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)