APRS Track Direct

My position About ☰

reset

VK4RHR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RHR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Rx1h*	DeEff%*	RXpkt*
1754401937	16.5 C	13.2 Volt	28 Pkt	86 pkt	41 Spam
1754400138	17 C	13.2 Volt	27 Pkt	86 pkt	31 Spam
1754395635	18.5 C	13.2 Volt	29 Pkt	87 pkt	33 Spam
1754394735	19 C	13.2 Volt	28 Pkt	88 pkt	42 Spam
1754393835	19 C	13.2 Volt	28 Pkt	91 pkt	47 Spam
1754392935	19.5 C	13.2 Volt	29 Pkt	90 pkt	35 Spam
1754392035	20 C	13.2 Volt	29 Pkt	88 pkt	37 Spam
1754391135	20.5 C	13.2 Volt	30 Pkt	88 pkt	41 Spam
1754390235	41 C	13.2 Volt	31 Pkt	87 pkt	46 Spam
1754389339	22.5 C	13.2 Volt	32 Pkt	88 pkt	42 Spam
1754388435	24 C	13.2 Volt	32 Pkt	90 pkt	34 Spam
1754387535	24.5 C	13.2 Volt	33 Pkt	89 pkt	53 Spam
1754386635	25 C	13.2 Volt	30 Pkt	89 pkt	39 Spam
1754385735	43.5 C	13.2 Volt	30 Pkt	89 pkt	43 Spam
1754384840	43.5 C	13.2 Volt	29 Pkt	88 pkt	39 Spam
1754383935	44 C	13.2 Volt	28 Pkt	89 pkt	42 Spam
1754383035	27 C	13.2 Volt	29 Pkt	91 pkt	45 Spam
1754382135	27.5 C	13.2 Volt	29 Pkt	91 pkt	41 Spam
1754381235	28 C	13.2 Volt	30 Pkt	92 pkt	33 Spam
1754380335	29 C	13.2 Volt	31 Pkt	92 pkt	49 Spam
1754379435	29.5 C	13.2 Volt	31 Pkt	92 pkt	48 Spam
1754378535	30 C	13.2 Volt	32 Pkt	93 pkt	48 Spam
1754377635	30.5 C	13.2 Volt	32 Pkt	92 pkt	39 Spam
1754376735	31 C	13.2 Volt	31 Pkt	93 pkt	47 Spam
1754375835	31.5 C	13.05 Volt	30 Pkt	92 pkt	42 Spam

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Rx1h: 0, 1, 0

DeEff%: 0, 1, 0

RXpkt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)