This is the latest recevied telemetry packets stored in our database for station/object KP3M-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BAT* | PIV* | TMP* | HUM* | CPT* |
|---|---|---|---|---|---|
| 1790650923 | 13.2 V | 4.9 V | 84 F | 0 % | 105 F |
| 1790647323 | 13.2 V | 4.9 V | 84 F | 0 % | 105 F |
| 1790643724 | 13.2 V | 4.9 V | 84 F | 0 % | 105 F |
| 1790640124 | 13.2 V | 4.9 V | 85 F | 0 % | 107 F |
| 1790636523 | 13.2 V | 4.9 V | 87 F | 0 % | 107 F |
| 1790632923 | 13.2 V | 4.9 V | 89 F | 0 % | 109 F |
| 1790629324 | 13.3 V | 4.9 V | 92 F | 0 % | 114 F |
| 1790625722 | 13.4 V | 4.9 V | 95 F | 0 % | 116 F |
| 1790622123 | 13.4 V | 4.9 V | 96 F | 0 % | 118 F |
| 1790618524 | 13.4 V | 4.9 V | 95 F | 0 % | 117 F |
| 1790614922 | 14.1 V | 4.9 V | 99 F | 0 % | 120 F |
| 1790611324 | 14.1 V | 4.9 V | 98 F | 0 % | 120 F |
| 1790607723 | 13.5 V | 5 V | 96 F | 0 % | 117 F |
| 1790604124 | 13.5 V | 5 V | 93 F | 0 % | 114 F |
| 1790600524 | 13.3 V | 4.9 V | 93 F | 0 % | 114 F |
| 1790596924 | 0 V | 0 V | -40 F | 0 % | 117 F |
| 1790593324 | 13.3 V | 4.9 V | 88 F | 0 % | 110 F |
| 1790589729 | 13.1 V | 4.9 V | 82 F | 0 % | 104 F |
| 1790586124 | 13.1 V | 4.9 V | 83 F | 0 % | 105 F |
| 1790578923 | 13.1 V | 4.9 V | 83 F | 0 % | 104 F |
| 1790575323 | 13.1 V | 4.9 V | 83 F | 0 % | 104 F |
| 1790571723 | 13.2 V | 4.9 V | 84 F | 0 % | 105 F |
| 1790568123 | 13.2 V | 4.9 V | 83 F | 0 % | 105 F |
*Used Equation Coefficients:
BAT: 0, 0.1, 0
PIV: 0, 0.1, 0
TMP: 0, 1, -40
HUM: 0, 1, 0
CPT: 0, 1, -40
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)