APRS Track Direct

My position About ☰

reset

W7FEL-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7FEL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786785953	14.03 Volt	480 Pkt	210 Pkt	86 Pcnt
1786785353	13.65 Volt	470 Pkt	210 Pkt	86 Pcnt
1786784753	13.73 Volt	470 Pkt	200 Pkt	85 Pcnt
1786784153	13.95 Volt	470 Pkt	200 Pkt	85 Pcnt
1786783553	13.95 Volt	480 Pkt	200 Pkt	84 Pcnt
1786782953	13.95 Volt	480 Pkt	190 Pkt	87 Pcnt
1786782353	13.88 Volt	490 Pkt	190 Pkt	85 Pcnt
1786781753	13.95 Volt	540 Pkt	210 Pkt	84 Pcnt
1786781153	13.88 Volt	560 Pkt	210 Pkt	83 Pcnt
1786780553	13.95 Volt	570 Pkt	220 Pkt	83 Pcnt
1786779953	13.95 Volt	600 Pkt	220 Pkt	83 Pcnt
1786779353	13.95 Volt	630 Pkt	230 Pkt	82 Pcnt
1786778753	13.95 Volt	650 Pkt	230 Pkt	83 Pcnt
1786778153	13.95 Volt	660 Pkt	220 Pkt	83 Pcnt
1786777553	14.03 Volt	670 Pkt	220 Pkt	84 Pcnt
1786776954	14.1 Volt	680 Pkt	230 Pkt	83 Pcnt
1786776354	13.95 Volt	670 Pkt	220 Pkt	82 Pcnt
1786775753	13.8 Volt	660 Pkt	210 Pkt	83 Pcnt
1786775153	14.1 Volt	650 Pkt	210 Pkt	85 Pcnt
1786774553	14.03 Volt	650 Pkt	220 Pkt	83 Pcnt
1786773953	13.95 Volt	660 Pkt	230 Pkt	84 Pcnt
1786773354	13.95 Volt	680 Pkt	240 Pkt	85 Pcnt
1786772753	14.03 Volt	690 Pkt	260 Pkt	85 Pcnt
1786772154	13.95 Volt	690 Pkt	260 Pkt	84 Pcnt
1786771556	13.95 Volt	680 Pkt	260 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)