APRS Track Direct

My position About ☰

reset

BV8SI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV8SI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1750071382	0.14 Rx Erlang	0.16 Tx Erlang	57 count/10m	1342 count/10m	0 count/10m
1750070730	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	0 count/10m
1750070183	0.14 Rx Erlang	0.08 Tx Erlang	43 count/10m	1327 count/10m	0 count/10m
1750069530	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	0 count/10m
1750068983	0.14 Rx Erlang	0.06 Tx Erlang	43 count/10m	1329 count/10m	0 count/10m
1750068330	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	0 count/10m
1750067782	0.14 Rx Erlang	0.09 Tx Erlang	49 count/10m	1333 count/10m	0 count/10m
1750067130	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	0 count/10m
1750066583	0.14 Rx Erlang	0.08 Tx Erlang	48 count/10m	1333 count/10m	0 count/10m
1750065930	1.6 Rx Erlang	0 Tx Erlang	8 count/10m	0 count/10m	0 count/10m
1750065383	27.9 Rx Erlang	17 Tx Erlang	60 count/10m	1336 count/10m	0 count/10m
1750064730	1.3 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	0 count/10m
1750064182	27.9 Rx Erlang	16 Tx Erlang	73 count/10m	1335 count/10m	0 count/10m
1750063530	2.4 Rx Erlang	0 Tx Erlang	10 count/10m	0 count/10m	0 count/10m
1750062982	27.6 Rx Erlang	27 Tx Erlang	90 count/10m	1336 count/10m	0 count/10m
1750062330	2.2 Rx Erlang	0 Tx Erlang	11 count/10m	0 count/10m	0 count/10m
1750061782	27.1 Rx Erlang	30 Tx Erlang	89 count/10m	1323 count/10m	0 count/10m
1750061130	1.8 Rx Erlang	0 Tx Erlang	9 count/10m	0 count/10m	0 count/10m
1750060582	27.7 Rx Erlang	33 Tx Erlang	98 count/10m	1307 count/10m	0 count/10m
1750059930	2.1 Rx Erlang	0 Tx Erlang	10 count/10m	0 count/10m	0 count/10m
1750059383	27.9 Rx Erlang	26 Tx Erlang	82 count/10m	1293 count/10m	0 count/10m

*Used Equation Coefficients:

CPUTemp: 0, 0.005, 0

RxPkts/20m: 0, 0.005, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)