This is the latest recevied telemetry packets stored in our database for station/object LA7DHA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770218535 | 137 | 80 | 255 | 76 | 53 |
| 1770218012 | 137 | 91 | 255 | 87 | 67 |
| 1770213215 | 137 | 79 | 255 | 94 | 77 |
| 1770209289 | 137 | 74 | 255 | 97 | 81 |
| 1770208689 | 137 | 70 | 255 | 100 | 84 |
| 1770208086 | 136 | 63 | 255 | 103 | 89 |
| 1770207466 | 137 | 42 | 255 | 60 | 34 |
| 1770192289 | 136 | 64 | 255 | 103 | 88 |
| 1770191687 | 137 | 57 | 255 | 107 | 94 |
| 1770191091 | 136 | 36 | 255 | 59 | 32 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)