APRS Track Direct

My position About ☰

reset

9W2RLW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2RLW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1791771008	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1791769808	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1791768608	0.06 Rx Erlang	0.03 Tx Erlang	31 count/10m	0 count/10m	15 count/10m
1791767408	0.08 Rx Erlang	0.04 Tx Erlang	69 count/10m	0 count/10m	44 count/10m
1791766207	0.03 Rx Erlang	0.02 Tx Erlang	28 count/10m	0 count/10m	14 count/10m
1791765008	0.04 Rx Erlang	0.03 Tx Erlang	40 count/10m	0 count/10m	17 count/10m
1791763808	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	4 count/10m
1791760833	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	9 count/10m
1791759633	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	3 count/10m
1791758433	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	3 count/10m
1791757233	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	4 count/10m
1791756033	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1791754833	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1791753633	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	3 count/10m
1791752433	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	3 count/10m
1791751233	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	4 count/10m
1791750033	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	4 count/10m
1791748108	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	4 count/10m
1791746908	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	4 count/10m
1791745708	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	4 count/10m
1791744508	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	4 count/10m
1791743308	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	5 count/10m
1791742108	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	3 count/10m
1791740908	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	5 count/10m
1791739708	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)