This is the latest recevied telemetry packets stored in our database for station/object ER-IR6AA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753687808 | 0 | 31 | 0 | 5 | 0 |
| 1753687208 | 1 | 26 | 1 | 3 | 0 |
| 1753686608 | 0 | 109 | 0 | 7 | 0 |
| 1753686008 | 0 | 83 | 0 | 13 | 0 |
| 1753685408 | 0 | 48 | 0 | 4 | 0 |
| 1753684808 | 0 | 57 | 0 | 5 | 0 |
| 1753684208 | 0 | 32 | 0 | 5 | 0 |
| 1753683608 | 0 | 459 | 0 | 6 | 0 |
| 1753683008 | 0 | 927 | 0 | 15 | 0 |
| 1753682408 | 0 | 30 | 0 | 3 | 0 |
| 1753681808 | 4 | 59 | 3 | 8 | 0 |
| 1753681208 | 0 | 42 | 0 | 5 | 0 |
| 1753680608 | 0 | 30 | 0 | 3 | 0 |
| 1753680008 | 0 | 20 | 0 | 2 | 0 |
| 1753679408 | 0 | 30 | 0 | 3 | 0 |
| 1753678808 | 0 | 20 | 0 | 2 | 0 |
| 1753678208 | 0 | 30 | 0 | 3 | 0 |
| 1753677608 | 0 | 20 | 0 | 2 | 0 |
| 1753677008 | 0 | 20 | 0 | 2 | 0 |
| 1753676408 | 0 | 30 | 0 | 3 | 0 |
| 1753675808 | 0 | 20 | 0 | 2 | 0 |
| 1753675208 | 0 | 30 | 0 | 3 | 0 |
| 1753674608 | 0 | 20 | 0 | 2 | 0 |
| 1753674008 | 0 | 20 | 0 | 2 | 0 |
| 1753673408 | 0 | 30 | 0 | 3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)