This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774087382 | 464 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1774086488 | 466 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1774082897 | 462 Volts | 579 Deg.F | 0 | 0 | 0 |
| 1774082000 | 504 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1774081104 | 502 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1774080207 | 497 Volts | 581 Deg.F | 0 | 0 | 0 |
| 1774079310 | 490 Volts | 581 Deg.F | 0 | 0 | 0 |
| 1774078413 | 496 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1774077516 | 494 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1774076619 | 493 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1774075720 | 492 Volts | 583 Deg.F | 0 | 0 | 0 |
| 1774074824 | 482 Volts | 583 Deg.F | 0 | 0 | 0 |
| 1774073927 | 489 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1774073030 | 489 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1774072134 | 494 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1774071237 | 487 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1774070340 | 486 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1774069444 | 485 Volts | 587 Deg.F | 0 | 0 | 0 |
| 1774068547 | 483 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1774067650 | 482 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1774066754 | 474 Volts | 589 Deg.F | 0 | 0 | 0 |
| 1774065857 | 477 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1774064960 | 472 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1774064064 | 467 Volts | 592 Deg.F | 0 | 0 | 0 |
| 1774063167 | 467 Volts | 593 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)