This is the latest recevied telemetry packets stored in our database for station/object LU3GHF-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1774610035 | 10 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 56 % |
| 1774609111 | 4 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 56 % |
| 1774608188 | 11 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 56 % |
| 1774607264 | 6 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 56 % |
| 1774606342 | 10 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 56 % |
| 1774605419 | 5 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 56 % |
| 1774604496 | 4 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 56 % |
| 1774603749 | 5 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 56 % |
| 1774602826 | 9 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 56 % |
| 1774601903 | 6 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 56 % |
| 1774600980 | 10 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 56 % |
| 1774600057 | 5 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774599134 | 11 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774598212 | 5 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 56 % |
| 1774597289 | 12 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774596366 | 5 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774595443 | 9 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774594520 | 4 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 56 % |
| 1774593598 | 10 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774592675 | 6 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 56 % |
| 1774591752 | 10 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 56 % |
| 1774590829 | 6 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 56 % |
| 1774589906 | 10 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 56 % |
| 1774588060 | 9 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 56 % |
| 1774587137 | 7 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 56 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)