This is the latest recevied telemetry packets stored in our database for station/object 9W2YIE-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1758200821 | 0 Pkt | 17 Pkt | 0 Pkt | -64 dBm | 1 % |
| 1758199896 | 0 Pkt | 14 Pkt | 0 Pkt | -60 dBm | 1 % |
| 1758198973 | 0 Pkt | 19 Pkt | 0 Pkt | -61 dBm | 1 % |
| 1758198048 | 0 Pkt | 10 Pkt | 0 Pkt | -64 dBm | 1 % |
| 1758197125 | 0 Pkt | 14 Pkt | 0 Pkt | -64 dBm | 1 % |
| 1758196201 | 0 Pkt | 13 Pkt | 0 Pkt | -60 dBm | 1 % |
| 1758195277 | 0 Pkt | 9 Pkt | 0 Pkt | -60 dBm | 1 % |
| 1758194353 | 0 Pkt | 34 Pkt | 0 Pkt | -61 dBm | 2 % |
| 1758193426 | 0 Pkt | 12 Pkt | 0 Pkt | -60 dBm | 10 % |
| 1758192502 | 0 Pkt | 6 Pkt | 0 Pkt | -61 dBm | 25 % |
| 1758191580 | 0 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 49 % |
| 1758190658 | 0 Pkt | 11 Pkt | 0 Pkt | -60 dBm | 59 % |
| 1758189733 | 0 Pkt | 4 Pkt | 0 Pkt | -60 dBm | 68 % |
| 1758188811 | 0 Pkt | 6 Pkt | 0 Pkt | -61 dBm | 74 % |
| 1758187887 | 0 Pkt | 7 Pkt | 0 Pkt | -65 dBm | 77 % |
| 1758186964 | 0 Pkt | 10 Pkt | 0 Pkt | -64 dBm | 78 % |
| 1758186040 | 0 Pkt | 18 Pkt | 0 Pkt | -64 dBm | 79 % |
| 1758185115 | 0 Pkt | 4 Pkt | 0 Pkt | -60 dBm | 86 % |
| 1758184193 | 0 Pkt | 5 Pkt | 0 Pkt | -63 dBm | 89 % |
| 1758183271 | 0 Pkt | 10 Pkt | 0 Pkt | -58 dBm | 85 % |
| 1758182347 | 0 Pkt | 5 Pkt | 0 Pkt | -59 dBm | 83 % |
| 1758181425 | 0 Pkt | 2 Pkt | 0 Pkt | -58 dBm | 82 % |
| 1758180503 | 0 Pkt | 3 Pkt | 0 Pkt | -59 dBm | 80 % |
| 1758179580 | 0 Pkt | 6 Pkt | 0 Pkt | -65 dBm | 80 % |
| 1758178658 | 0 Pkt | 1 Pkt | 0 Pkt | -65 dBm | 75 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)