This is the latest recevied telemetry packets stored in our database for station/object E22KKC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1718711725 | 33 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.62 V |
1718709899 | 54 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0.55 V |
1718708073 | 59 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.78 V |
1718706247 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.57 V |
1718704603 | 49 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0.78 V |
1718702776 | 27 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0.76 V |
1718700950 | 20 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0.64 V |
1718699123 | 29 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.76 V |
1718697398 | 5 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0.57 V |
1718695573 | 29 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0.76 V |
1718693747 | 53 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.68 V |
1718691921 | 17 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0.74 V |
1718690095 | 24 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.53 V |
1718688269 | 24 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0.55 V |
1718686444 | 18 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.55 V |
1718684618 | 25 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.74 V |
1718682792 | 18 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.62 V |
1718680967 | 28 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0.84 V |
1718679141 | 41 Pkt | 0 Pkt | 1 Pkt | -40 dBm | 0.78 V |
1718677315 | 44 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.78 V |
1718675488 | 23 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0.84 V |
1718673662 | 132 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 0.74 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)