This is the latest recevied telemetry packets stored in our database for station/object OE3LXF-60. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1790653678 | 991.8 hPa | 22.7 C deg | 0 % | 1022.3 hPa | 0 C deg |
| 1790651868 | 992.1 hPa | 22.8 C deg | 0 % | 1022.5 hPa | 0 C deg |
| 1790650046 | 992.1 hPa | 22.5 C deg | 0 % | 1022.5 hPa | 0 C deg |
| 1790646416 | 992.1 hPa | 22.8 C deg | 0 % | 1022.5 hPa | 0 C deg |
| 1790644617 | 991.9 hPa | 23.7 C deg | 0 % | 1022.2 hPa | 0 C deg |
| 1790642799 | 991.7 hPa | 24.4 C deg | 0 % | 1021.9 hPa | 0 C deg |
| 1790640981 | 991.8 hPa | 24.6 C deg | 0 % | 1022 hPa | 0 C deg |
| 1790639156 | 991.9 hPa | 24.9 C deg | 0 % | 1022.1 hPa | 0 C deg |
| 1790637360 | 991.7 hPa | 25.1 C deg | 0 % | 1021.9 hPa | 0 C deg |
| 1790635528 | 991.7 hPa | 25.3 C deg | 0 % | 1021.8 hPa | 0 C deg |
| 1790631904 | 991.6 hPa | 26 C deg | 0 % | 1021.7 hPa | 0 C deg |
| 1790630091 | 991.7 hPa | 26.1 C deg | 0 % | 1021.8 hPa | 0 C deg |
| 1790624663 | 991.5 hPa | 26 C deg | 0 % | 1021.5 hPa | 0 C deg |
| 1790622863 | 991.3 hPa | 26.1 C deg | 0 % | 1021.4 hPa | 0 C deg |
| 1790621046 | 991.2 hPa | 26.3 C deg | 0 % | 1021.3 hPa | 0 C deg |
| 1790613767 | 990.4 hPa | 28.1 C deg | 0 % | 1020.2 hPa | 0 C deg |
| 1790610119 | 990.2 hPa | 28.8 C deg | 0 % | 1020 hPa | 0 C deg |
| 1790595608 | 991.1 hPa | 27.9 C deg | 0 % | 1021 hPa | 0 C deg |
| 1790588341 | 991.6 hPa | 25.2 C deg | 0 % | 1021.7 hPa | 0 C deg |
| 1790568377 | 990.7 hPa | 20.4 C deg | 0 % | 1021.4 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)