This is the latest recevied telemetry packets stored in our database for station/object CHAIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749328744 | 0.1 | 14 | 14 | 14 | 14.4 |
| 1749327844 | 0.1 | 13.9 | 14 | 13.9 | 14.4 |
| 1749326944 | 0.1 | 13.9 | 14 | 13.9 | 14.4 |
| 1749326044 | 0.1 | 13.9 | 14 | 13.9 | 14.4 |
| 1749325144 | 0.1 | 13.9 | 14 | 13.9 | 14.4 |
| 1749324244 | 0.1 | 13.9 | 14 | 13.9 | 14.3 |
| 1749323344 | 0.1 | 13.9 | 13.9 | 13.9 | 14.3 |
| 1749322444 | 0.1 | 13.7 | 13.9 | 13.7 | 14.3 |
| 1749321544 | 0.1 | 13.7 | 13.9 | 13.7 | 14.3 |
| 1749319744 | 0.1 | 13.6 | 13.7 | 13.6 | 14.2 |
| 1749318844 | 0.1 | 13.6 | 13.6 | 13.6 | 14.1 |
| 1749317944 | 0.1 | 13.3 | 13.4 | 13.3 | 13.7 |
| 1749317044 | 0.1 | 13.1 | 13.1 | 13.1 | 13.5 |
| 1749316144 | 0.1 | 13 | 13 | 13 | 13.3 |
| 1749315244 | 0.1 | 13 | 13 | 13 | 13.3 |
| 1749314344 | 0.1 | 12.9 | 12.9 | 12.9 | 13.2 |
| 1749312544 | 0.1 | 12.8 | 12.8 | 12.8 | 13.1 |
| 1749311644 | 0.1 | 12.7 | 12.8 | 12.7 | 13.1 |
| 1749310744 | 0.1 | 12.7 | 12.7 | 12.7 | 13 |
| 1749309844 | 0.1 | 12.7 | 12.7 | 12.7 | 13 |
| 1749308945 | 0.1 | 12.7 | 12.7 | 12.7 | 13 |
| 1749308044 | 0.1 | 12.7 | 12.7 | 12.6 | 13 |
| 1749307144 | 0.1 | 12.6 | 12.7 | 12.6 | 13 |
| 1749306244 | 0.1 | 12.6 | 12.7 | 12.6 | 12.9 |
| 1749305343 | 0.1 | 12.6 | 12.7 | 12.6 | 12.9 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)