This is the latest recevied telemetry packets stored in our database for station/object OE3VPA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1762338722 | 13.19 Volt | 940 pkt | 0 Pkt | 71 Pcnt | 0 None |
| 1762338422 | 13.19 Volt | 960 pkt | 0 Pkt | 72 Pcnt | 0 None |
| 1762338121 | 13.19 Volt | 930 pkt | 0 Pkt | 71 Pcnt | 0 None |
| 1762337821 | 13.11 Volt | 930 pkt | 0 Pkt | 71 Pcnt | 0 None |
| 1762337521 | 13.11 Volt | 920 pkt | 0 Pkt | 71 Pcnt | 0 None |
| 1762337220 | 13.19 Volt | 930 pkt | 0 Pkt | 72 Pcnt | 0 None |
| 1762336920 | 13.19 Volt | 950 pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1762336620 | 13.43 Volt | 960 pkt | 0 Pkt | 72 Pcnt | 0 None |
| 1762336320 | 13.83 Volt | 960 pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1762336019 | 13.43 Volt | 970 pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1762335719 | 13.51 Volt | 970 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762335419 | 13.35 Volt | 980 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762335118 | 13.19 Volt | 990 pkt | 0 Pkt | 75 Pcnt | 0 None |
| 1762334818 | 13.19 Volt | 980 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762334518 | 13.19 Volt | 1000 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762334218 | 13.19 Volt | 1000 pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1762333917 | 13.19 Volt | 1030 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762333617 | 13.19 Volt | 1030 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762333317 | 13.19 Volt | 1030 pkt | 0 Pkt | 74 Pcnt | 0 None |
| 1762333017 | 13.19 Volt | 1040 pkt | 0 Pkt | 75 Pcnt | 0 None |
| 1762332723 | 13.19 Volt | 1060 pkt | 0 Pkt | 75 Pcnt | 0 None |
| 1762332416 | 13.19 Volt | 1070 pkt | 0 Pkt | 75 Pcnt | 0 None |
| 1762332116 | 13.19 Volt | 1050 pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1762331815 | 13.19 Volt | 1040 pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1762331515 | 13.19 Volt | 1060 pkt | 0 Pkt | 73 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)