This is the latest recevied telemetry packets stored in our database for station/object VA2STK-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774492702 | 0 | 8 | 0 | 1 | 0 |
| 1774492102 | 0 | 2 | 0 | 1 | 0 |
| 1774491502 | 0 | 0 | 0 | 0 | 0 |
| 1774490902 | 0 | 16 | 0 | 1 | 0 |
| 1774490303 | 0 | 0 | 0 | 0 | 0 |
| 1774489702 | 0 | 0 | 0 | 0 | 0 |
| 1774489102 | 0 | 8 | 0 | 1 | 0 |
| 1774488502 | 0 | 734 | 0 | 17 | 0 |
| 1774487902 | 0 | 824 | 0 | 29 | 0 |
| 1774487302 | 0 | 916 | 0 | 13 | 0 |
| 1774486703 | 0 | 948 | 0 | 13 | 0 |
| 1774486102 | 2 | 865 | 1 | 20 | 0 |
| 1774485502 | 97 | 799 | 2 | 20 | 0 |
| 1774484903 | 0 | 875 | 0 | 20 | 0 |
| 1774484303 | 8 | 834 | 1 | 25 | 0 |
| 1774483702 | 60 | 218 | 3 | 12 | 0 |
| 1774483102 | 101 | 104 | 8 | 11 | 0 |
| 1774482502 | 0 | 4 | 0 | 2 | 0 |
| 1774481902 | 57 | 144 | 5 | 7 | 0 |
| 1774481302 | 245 | 490 | 15 | 16 | 0 |
| 1774480702 | 316 | 314 | 12 | 13 | 0 |
| 1774480102 | 307 | 387 | 13 | 14 | 0 |
| 1774479503 | 230 | 491 | 16 | 16 | 0 |
| 1774478902 | 367 | 461 | 12 | 11 | 0 |
| 1774478302 | 545 | 239 | 14 | 13 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)