APRS Track Direct

My position About ☰

reset

SR9WXP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Visc10min*	Digi10min*	Vbatt*	Tempre*
1836274540	112 Pkt	1 Pkt	6 Pkt	13.82 V	18.5 DegC
1836274540	112 Pkt	1 Pkt	6 Pkt	13.82 V	18.5 DegC
1836274390	131 Pkt	1 Pkt	7 Pkt	14.1 V	18.5 DegC
1836273940	136 Pkt	1 Pkt	3 Pkt	14.08 V	18.5 DegC
1836273939	136 Pkt	1 Pkt	3 Pkt	14.08 V	18.5 DegC
1762320151	120 Pkt	0 Pkt	1 Pkt	14.08 V	9 DegC
1762319551	103 Pkt	0 Pkt	0 Pkt	13.92 V	9 DegC
1762319550	103 Pkt	0 Pkt	0 Pkt	13.92 V	9 DegC
1762318950	107 Pkt	0 Pkt	0 Pkt	13.9 V	9 DegC
1762318351	105 Pkt	1 Pkt	2 Pkt	13.82 V	9 DegC
1762318350	105 Pkt	1 Pkt	2 Pkt	13.82 V	9 DegC
1762317751	88 Pkt	2 Pkt	2 Pkt	13.82 V	9 DegC
1762317751	88 Pkt	2 Pkt	2 Pkt	13.82 V	9 DegC
1762316548	106 Pkt	0 Pkt	2 Pkt	13.78 V	9 DegC
1762315949	108 Pkt	1 Pkt	2 Pkt	13.84 V	9 DegC
1762315349	104 Pkt	1 Pkt	0 Pkt	13.86 V	9 DegC
1762314749	128 Pkt	1 Pkt	3 Pkt	13.82 V	9 DegC
1762314149	103 Pkt	0 Pkt	0 Pkt	13.82 V	9 DegC
1762313549	102 Pkt	2 Pkt	2 Pkt	13.8 V	8.5 DegC
1762312948	126 Pkt	1 Pkt	3 Pkt	13.8 V	8.5 DegC
1762312349	111 Pkt	1 Pkt	1 Pkt	13.82 V	9 DegC
1762311749	116 Pkt	3 Pkt	0 Pkt	13.76 V	9 DegC
1762311148	105 Pkt	1 Pkt	5 Pkt	13.76 V	9 DegC
1762310537	115 Pkt	0 Pkt	2 Pkt	13.74 V	9 DegC
1762310537	115 Pkt	0 Pkt	2 Pkt	13.74 V	9 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Visc10min: 0, 1, 0

Digi10min: 0, 1, 0

Vbatt: 0, 0.02, 10

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)