APRS Track Direct

My position About ☰

reset

LU2DXW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DXW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1779761193	32 Pkt	0 Pkt	-56 dBm	13.6 V
1779759368	35 Pkt	2 Pkt	-58 dBm	13.6 V
1779757543	23 Pkt	2 Pkt	-60 dBm	13.6 V
1779755718	4 Pkt	0 Pkt	-57 dBm	13.6 V
1779753848	27 Pkt	1 Pkt	-61 dBm	13.6 V
1779752022	38 Pkt	0 Pkt	-58 dBm	13.6 V
1779750197	20 Pkt	0 Pkt	-57 dBm	13.6 V
1779748374	21 Pkt	1 Pkt	-54 dBm	13.6 V
1779746549	42 Pkt	0 Pkt	-57 dBm	13.6 V
1779742897	51 Pkt	1 Pkt	-60 dBm	13.6 V
1779741070	55 Pkt	1 Pkt	-56 dBm	13.6 V
1779739243	37 Pkt	0 Pkt	-55 dBm	13.6 V
1779737418	38 Pkt	0 Pkt	-56 dBm	13.6 V
1779735593	38 Pkt	3 Pkt	-53 dBm	13.6 V
1779733768	35 Pkt	0 Pkt	-61 dBm	13.6 V
1779731943	37 Pkt	0 Pkt	-58 dBm	13.6 V
1779730118	37 Pkt	3 Pkt	-59 dBm	13.6 V
1779728293	48 Pkt	2 Pkt	-54 dBm	13.6 V
1779726467	53 Pkt	2 Pkt	-56 dBm	13.6 V
1779724641	42 Pkt	1 Pkt	-55 dBm	13.6 V
1779722814	26 Pkt	3 Pkt	-55 dBm	13.6 V
1779720990	33 Pkt	2 Pkt	-53 dBm	13.6 V
1779719165	30 Pkt	2 Pkt	-54 dBm	13.6 V
1779717340	22 Pkt	2 Pkt	-56 dBm	13.6 V
1779715515	22 Pkt	2 Pkt	-57 dBm	13.6 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)