This is the latest recevied telemetry packets stored in our database for station/object LB4FH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | GAS* |
|---|---|---|---|---|---|
| 1774755551 | 3.5 | -5.6 | 72.51 | 1022.5 | 71.62 |
| 1774752842 | 3.53 | -5 | 71.2 | 1022.38 | 72.68 |
| 1774751939 | 3.54 | -5.1 | 71.45 | 1022 | 73.31 |
| 1774751043 | 3.55 | -4.8 | 70.8 | 1022.13 | 73.12 |
| 1774749230 | 3.57 | -4.2 | 68.48 | 1022 | 72.87 |
| 1774748327 | 3.6 | -4.4 | 69.72 | 1022.5 | 72.49 |
| 1774744715 | 3.65 | -3.7 | 69.4 | 1022.63 | 73.06 |
| 1774729183 | 3.99 | 18.4 | 49.06 | 1018.75 | 33.83 |
| 1774728281 | 3.97 | 18.6 | 49.08 | 1018.5 | 32.31 |
| 1774727377 | 3.97 | 17.9 | 51.2 | 1018.75 | 30.44 |
| 1774726474 | 3.95 | 18.8 | 48.19 | 1018.13 | 25.19 |
| 1774725572 | 3.93 | 19.3 | 47.31 | 1017.88 | 26.32 |
| 1774724669 | 3.92 | 18.8 | 46.24 | 1018.25 | 28.82 |
| 1774724437 | 3.91 | 18.7 | 47.09 | 1018.25 | 29.1 |
| 1774723534 | 3.89 | 17 | 45.39 | 1017.88 | 31.7 |
| 1774721185 | 3.72 | 2.1 | 55.26 | 1018.25 | 66.24 |
| 1774720282 | 3.74 | 3.4 | 49.63 | 1017.75 | 66.19 |
| 1774719379 | 3.76 | 3.9 | 51.3 | 1017.13 | 61.38 |
| 1774718476 | 3.78 | 10.5 | 35.21 | 1016.75 | 59.59 |
| 1774717572 | 3.8 | 12 | 33.05 | 1016.5 | 59.42 |
| 1774716669 | 3.8 | 10.8 | 34.07 | 1016.5 | 61.52 |
| 1774715766 | 3.82 | 14.4 | 28.41 | 1015.88 | 56.5 |
| 1774685321 | 3.87 | 16.7 | 35.33 | 1014.5 | 59.59 |
| 1774679903 | 3.68 | 21.8 | 44.8 | 1013 | 42.81 |
| 1774679001 | 3.67 | 19.4 | 46.97 | 1013.5 | 48.85 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
GAS: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)