This is the latest recevied telemetry packets stored in our database for station/object F4JJE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779760856 | 367 | 0 | 0 | 0 | 0 |
| 1779759056 | 369 | 0 | 0 | 0 | 0 |
| 1779758156 | 370 | 0 | 0 | 0 | 0 |
| 1779757258 | 371 | 0 | 0 | 0 | 0 |
| 1779755451 | 372 | 0 | 0 | 0 | 0 |
| 1779753651 | 373 | 0 | 0 | 0 | 0 |
| 1779750050 | 375 | 0 | 0 | 0 | 0 |
| 1779748251 | 377 | 0 | 0 | 0 | 0 |
| 1779746451 | 379 | 0 | 0 | 0 | 0 |
| 1779744650 | 380 | 0 | 0 | 0 | 0 |
| 1779742850 | 382 | 0 | 0 | 0 | 0 |
| 1779741050 | 384 | 0 | 0 | 0 | 0 |
| 1779737451 | 387 | 0 | 0 | 0 | 0 |
| 1779736571 | 388 | 0 | 0 | 0 | 0 |
| 1779734771 | 390 | 0 | 0 | 0 | 0 |
| 1779733871 | 389 | 0 | 0 | 0 | 0 |
| 1779732971 | 391 | 0 | 0 | 0 | 0 |
| 1779730270 | 392 | 0 | 0 | 0 | 0 |
| 1779729370 | 393 | 0 | 0 | 0 | 0 |
| 1779728470 | 391 | 0 | 0 | 0 | 0 |
| 1779727570 | 393 | 0 | 0 | 0 | 0 |
| 1779726670 | 393 | 0 | 0 | 0 | 0 |
| 1779725769 | 393 | 0 | 0 | 0 | 0 |
| 1779724869 | 394 | 0 | 0 | 0 | 0 |
| 1779723069 | 396 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)